3D IOT RFID Gate Reader Antenna In ISO15693 For Library Anti Theft

Product Introduction:

The RFID library anti-theft gate is part of the future IOT world. It is integrated 3D intelligent technology and can detect any directions in the 3D spa of device induction zone; The equipment supports electronic tags in accordance with ISO/IEC 15693 and ISO 18000-3 standard from multiple vendors, both AFI and EAS safety test model available; Its system supports up to 9 aisles at the same passageway. Aisle identification distance is above 90cm (The identification distance is related with tag performance, size, site environment and so on). This product can be widely used in library or archive entrance against theft and other fields.

Key Benefits:

• Single technology is required for both inventory and theft management of the library
• Library staff are alerted immediately when un-borrowed items pass through the theft detection gates
• Would-be thieves are deterred by the physical presence of the gates
• Number of patrons passing through the gates is captured by a counter on the gates

Product Features:

• Three-dimensional orientation detecting, tags can be detected in all directions.
• Aisle width more than 90 cm(relative to tags quality and size).
• Support multiple -channel paralleling usage.
• Support EAS and AFI optional detection
• Support EAS+AFI mixed detection
• Support Tag UID detection
• Support direction discrimination and statistic the number of people check-in/ check-out.
• 8 bits digital tube display, counting No. of people check-in/ check-out and device parameters can be displayed
• Support relay output control
• Upgrade-able firmware, support redevelopment and custom-made as requirement

Product Application:

RFID library manageemnt, RFID archive management, etc.