BS1363 Figure17a Test Apparatus For Temperature Rise Test

Parameters:

Test cabinet Meterial: 10mm nominal plywood.
Test cabinet Finish: Internal. Two coats of matt paint. BS4800 colour no.08 C35.
Dimensions: Internal.500mmX500mmX500mm with a tolerance of +-10mm for each dimension.
One will to be removable to provide access.
Location: Minimum clearance from adjacent surfaces, measured horizontally 150mm on all sides, measured vertially 300mm above, 500mm below.

BS1363 List of references

Figure17a)-Test apparatus for temperature-rise- test
Figure 17b)-dummy front plate for temperature-rise test
Figure 18-apparatus for flexing test
Figure 19-solid link for test on fuse clips
Figure 20--tumbling barrel
Figure 21-pendulum impact test
Figure 23-apparatus for pressure test
Figure 24-apparatus for ball pressure test
Figure 28-calibrated link
Figure 29-calibration jig for calibrated link
Figure 30-test plug for temperature rise
Figure 32-apparatus for tests on adaptor pins

Figure 33-apparatus for torsion test on pins
Figure 34-test plug
Figure 35-simulated plug and cord devices
Figure 36-apparatus for calibration of turning moment of
simulated plug
Figure 37-turning moment apparatus
Figure 38-solid links for test on fuse clips

Figure1 test pin
Figure 2a)-apparatus for mechanical strength test on resilient covers
Figure 2b)-hardwood block for Figure 2a)
Figure 3-disposition of socket contacts
Figure 4-dimensions and disposition of pins
Figure 5-gauge for adaptor pins
Figure 6-apparatus for testing plug cover fixing screws
Figure 7-mounting plate
Figure 8-plug pin deflection test apparatus for resilient adaptors
Figure 9-apparatus for abrasion test on insulating sleeves of plug pins
Figure 10-apparatus for pressure test at high temperatures
Figure 11-GO gauge for socket-outlet
Figure 12-contact test gauge
Figure 13-test apparatus and circuit for use with contact and non-contact test gauges
Figure 14-non-contact test gauge
Figure 16-withdrawal pull gauges for effectiveness of contact