MachineU > China Products > Electrical Equipment & Supplies > Electrical Instruments > Test Pencil
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
Specifications
Brand Name :
SHC
Model Number :
SC-ASF2.8
Certification :
CNAS、TUV、ITS、CSA、BV、SGS (cost additional)
Place of Origin :
China
MOQ :
1 piece
Price :
USD 50-2000 piece
Payment Terms :
T/T, Western Union, MoneyGram, L/C
Supply Ability :
999 pieces per month
Delivery Time :
in 15 work days
Packaging Details :
Wooden Carton
Standards :
AS/NZS 3112 Figure 2.8
Name :
Application Of Force For Pin Bending Test
Function :
For Australian and New Zealand Pin Bending Test
The distance moved from the point of application :
7.5 ±0.3 mm
Dimensions :
W*D*H=350mm *250mm* 140mm
Weight :
About 15KG
The point of application of the force from the face of the plug :
14 ±0.5 mm
Time of the pins shall be tested :
20 complete cycles
Description

Figure 2.8 Application Of Force For Pin Bending Test AS / NZS 3112

Figure 2.1 dimensions of plugs
Figure 2.2 apparatus for flexing test
Figure 2.3 form of pin
Figure 2.4 dimensions of insulation on insulated live pins
Figure 2.5 pressure test apparatus for insulation on insulated plug pins at high temperature
Figure 2.6 impact test apparatus for insulation on insulated plug pins at low temperature
Figure 2.7 abrasion test apparatus for insulation on insulated pin plugs
Figure 2.8 application of force for pin bending test
Figure 2.9 mounting of plug for temperature rise test
Figure 2.10 pin clamping unit for the temperature rise test

Application

All flatpins of plugs rated up to and including 15 A shall be subjected to a pin bending test.

Three sample plugs not subjected to any previous tests shall be tested as follows:

Pins ofassembled plugs shall be tested by clamping the plug in a rigid holding blockand applying a bending force, as shown in Figure 2.8, to the pin under test.

The pins shall be straight at the beginning of the test. If there is any doubt about thestraightness of the pin, it shall be checked by the appropriate plug gaugeshown in Appendices A, B or F.

The point of application of the force shall be 14 ±0.5 mm from the face of the plug.

The direction of the force shall be along a line parallel to the face of the plug.

Active and neutral pins shall be forced towards the centroid of the plug and then back tothe starting point. On the first sample plug, any earth pin shall be forced butin one direction only and then forced back to the starting point. On the secondsample plug, any earth pin shall be forced in the opposite direction to thatused for testing the first sample plug. On the third sample plug, any earth pinshall be forced in the direction that gave the least favourableresult during testing of the first two sample plugs.

The distancemoved from the point of application shall be 7.5 ±0.3 mm, and then the pin shallbe forced back to the starting point. Any ‘spring-back’ is ignored.

The travelfrom the starting point to the end point (7.5 mm) and back to the startingpoint is one cycle (i.e. one cycle is two separate movements).

The speed of deflections shall be a maximum of 50 mm/s, without intentional delay between consecutive movements within each cycle.

The interval between successive cycles shall be a minimum of 10 s.

The durationof one cycle shall be a maximum of 60 s.

The pins shall be tested for 20 complete cycles.

ConformsTo

AS/NZS 3112:2011 +A2:2012 clause 2.13.7.2 Figure 2.8

Specifications

A. The point of application of the force shall be 14 ±0.5 mm from the face of the plug.

B. The distance moved from the point of application shall be 7.5 ±0.3 mm

C. Dimensions : W*D*H=350mm *250mm* 140mm

D. Weight : About 15KG

Ordering Information

Test apparatus for pin bending test AS/NZS 3112

Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus

Product tags

screw capped test tube

,

screw cap test tubes

,

screw cap test tube
Send your message to this supplier
Send Now

Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus

Ask Latest Price
Product Detail
Brand Name :
SHC
Model Number :
SC-ASF2.8
Certification :
CNAS、TUV、ITS、CSA、BV、SGS (cost additional)
Place of Origin :
China
MOQ :
1 piece
Price :
USD 50-2000 piece
Contact Supplier
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus

Guangzhou Shice Equipment Co., Ltd.

Active Member
5 Years
guangzhou
Since 2016
Business Type :
Manufacturer
Main Products :
Ingress Protection Test Equipment, IEC Test Equipment, Flammability Test Equipment
Total Annual :
1000000-3000000
Employee Number :
>100
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Plug Socket Tester
MachineU China Products Electrical Equipment & Supplies Electrical Instruments Test Pencil
Contact Supplier
Submit Requirement