Outline
COL5602 is a single-channel DVB-T2 modulator. Ithas two ASI inputs, and provides one IP signal input interface for DVB-T2 SFN/MFN. It can receive signal in both standard TS format and T2-MI format, and outputsone DVB-T2 (30MHz~900MHz) modulated signal after channel coding, interleavingand modulation. It operating parameters can be configured locally or remotely via DVB-T2 gateway. COL5602’s output signal can be directly connected with power amplifier to constitute a digital terrestrial transmitting station.
Main Features
ASI Input Interface | Type | 2 x BNC-J12(75Ω) |
Data Format | TS (188/204 Bytes adaptive) or T2 MI | |
Data Rate | 0~100Mbps | |
IP Input Interface | Type | 1 x 10/100/1000 base-T - RJ45 |
Data Format | IP, RTP, UDP, IGMP (V2 & V3) | |
VLAN ID | 0~4095(IEEE 802.1q) | |
Data Encapsulation&FEC | SMPTE-2022 | |
Clock& Synchronization Interface | 10MHz | BNC-J12(50Ω) |
1PPS | BNC-J12(50Ω) | |
RF Output Interface | Type | 1 x BNC-J12(50Ω) |
RF Frequency Range | 30~900MHz | |
Output EPL | 0dBm | |
RF Detection Interface | Type | 1 x BNC-J12(50Ω) |
Output EPL | -20dB | |
Features | Transmission Mode | MFN, SFN-SISO, SFN-MISO |
Modulation Mode | System A, System B, Multi-PLP | |
Constellation | QPSK, 16 QAM, 64 QAM, 256 QAM(standard or rotating) | |
Carriers | 1k, 2k, 4 k, 8k, Extended 8k, 16k, Extended 16k,32k, Extended 32k | |
Bandwidth | 5M,6M, 7M,8M | |
Protection Interval | 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 | |
Test Mode | PRBS/Sinus/Spectrum-Gap/Null Symbol insertion | |
Management | Interface Type | Ethernet 10/100/1000 Base-T |
Connector | RJ-45 | |
Power | Input Voltage Range | 85~260V AC |
Input Frequency Range | 50/60Hz | |
Typical Consumption | <20W | |
DC Output | 5V/5A,12V/1A | |
Environmental | Operating Temperature Range | 5℃~45℃ |
Storage Temperature Range | -25~85℃ | |
Operating Humidity | 10%~90% | |
Physical | Dimensions (W x H x D) | 483mm x 44mm x 300mm |
Weight | <5Kg |