Fast heating speed iqualitrol Melt Flow Rate Meter
ASR-5605 with LCD display

Product Features:

1. Fast heating speed and minimal overshoot;
2. High constant temperature accuracy;

3. After filling, the constant temperature state can be quickly restored;
4. The test parameters are easy to calibrate and correct;

5. Manual and automatic cutting test methods can be used;
6. LCD display;
7. Equipped with a printer to automatically print out test results.

Technical Specifications:

1. Extrusion discharge part

Discharge port diameter: Φ2.095±0.005 mm, discharge port length: 8.000±0.025 mm
Charging barrel diameter: Φ9.550±0.025mm, charging barrel length: 152±0.1mm
Piston rod head diameter: 9.475±0.015 mm, piston rod head length: 6.350±0.100 mm

2. Standard test load (a complete set of 8 levels of weights in total)

3. Temperature range: normal room temperature - 400℃ (500℃ optional)

4. Constant temperature accuracy: ±0.5℃

5. Display resolution: 0.1℃

6. Cutting method: manual or automatic cutting optional

7. Temperature recovery time: less than 4 minutes

8. Printing: Micro printer automatically prints output

9. Power supply voltage: AC220V±10% 50HZ

Technical Specifications Table:

Brief Introduction:

Melt Index Tester meets the standards GB/ T3682-2000, the main parameters of Melt Index Tester also meet the standard requirements of ISO1133-97, ASTM1238, JIS, ect..

It is used in polyethylene, polypropylene, polystyrene, ABS, polyethylene amide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate, and other plastic materials, to measure MFR and MVR.

It is widely applied to various industries like plastic production, plastic products, petrochemical, and related institutions, research institutes and inspection departments.