High Power 90A 24 Volts 2 Coil Latching Relay With UC3 Certificate
1.Overview:
● Max.Switching Current:90A
● Permanent Magnetic Immunity to 500mT
● Power Consumption:1.5W(65ms)
● Dimension:32*35.5*16.5mm
● IEC62055-31 UC3 Certified
● Widely used for smart meter,smart grid,solar panel,EV charger,switching cabinet,RCCB/RMB,lighting systerm
circuit protection,electrical machine
2.Specification:
Dimension(mm) | 32×35.5×16.5 |
Weight ( g ) | ≈35g |
Contact Arrangement | 1A/1B |
Contact Material | AgSnO2 |
Ambient Temperature | -45~+85℃ |
Vibration | 10~50Hz,0.075mm |
Shock | 1000m/s²,(100g) |
Nominal Voltage | 9~36VDC |
Power Consumption | <1.5W |
Operating Voltage | 7.2V |
Max. Motor Voltage | 36V |
Max. Switching Current | 90A |
Surge Current | 2500A/10ms |
Motor Resistance(R±15%) | 60Ω |
Contact Voltage | <60mV |
Contact Resistance | <0.6mΩ |
Dielectric Strength | Motor to Contact | >4000VAC 1min |
Across Open Contact | >2000VAC 1min |
Electrical Life | >10000cycles |
Mechanical Life | >100000cycles |
Pulse Time | 100ms~150ms |
Picking-up Time | <65ms |
Release Time | <65ms |
Insulation Resistance | >1000MΩ(500VDC) |
3.Application Notes:
3.1. Suggestions of relay’s input
(1) Polarity-Please check the polarity inside of our technical specification, if single coil then”+ -” or “- +”are fine, you can change it by one pulse.
If double coil then it‘s necessary to confirm “-+-” or “+-+“before leaving the our factory.
(2) Driving-Please energize the relay at our recommend pulse width, rated voltage for reliable performance,
if 1.5 time or 2 times of value or lower driving condition plz confirm with our engineer.
(3) Relays’contact status may be changed during transportation or installation due to impact of external force, therefore please reset to the required status.
3.2 Suggestions of relay’s output
(1) When choosing the relay with hard connection,please avoid the external force on load terminals during or after the installation.
(2) When the relay will be connected with screw or bolts to the relays’ terminals,
plz make sure your connection is fastened and prevent relay from damages or other safety problems due to temp. Rise..
(3) The sampling signal wires of products are limited, please do not pull or torque during installation.
4.Why Choose Us
IVY METERING specializes in the development and manufacturing of high-powered, high-quality latching relays.
We offer a line of latching relays spanning from 32A to 200A for both single-phase and polyphase switching purposes.

5.FAQ
Q1: What kind of product and service do you have?
We provide all kinds of electronics including power relay, latching relay, change-over switch, current transformer, shunt, smart sensor, communication & power supply module, transformer etc.
The manufacturer of meter instrument, electrical device, EV charger, medical equipment can find one step solution here. Individual buyer,distributor or (sole/ designated) agents are also welcomed by us.
Q2: Are you are factory or trading company?
We are the manufacturer,designer and sales company. Our own factory was located in Tongxiang city of Zhejiang province.
For our history plz click About us or watch IVY factory video on Youtube.
Q3: Whether the price will change greatly?
To business customers, we mark price can be negotiated here as huge demand.
Usually we will not change the prices unless some force majeure such as trade war, exchange rate change greatly etc.
Q4: Can you offer customized solution, how should I get a quotation?
Yes!We can offer customized products especially when we supply EV accessories and meter accessories. To get a quoation plz kindly offer your basic company info for registration and offer your drawing.
It usually takes 12 hours to 48 hours to filnish the design and drawing (If complicated then plz refer to pracatical situation).
Q5: How do you handle the quality problems?
We are proud of our quality! If any accidents on quality, we have before-sales, in-sales and after-sales service. And every customer will have your own sales expert and technical support.