PE-1200×1500-Jaw crusher, feed size: 0-950mm, production capacity: 16-1000T/H.

Jaw crusher, feed size: 0-950mm, production capacity: 16-1000T/H.

It is mainly used for crushing various kinds of high hardness ores, such as granite, basalt, etc. It is widely used in mining, refining, building materials, highway, railway, water conservancy and chemical industries. It is widely used in mining, refining, building materials, highway, railroad, water conservancy and chemical industry. The maximum compressive strength of the crushed material is 320MPA. The working part of the jaw crusher is two jaws, one is the fixed jaw (fixed frequency), which is fixed vertically (or slightly outwardly inclined at the upper end) on the front wall of the machine body, and the other is the movable jaw (movable jaw), which is tilted in the position and forms a crushing cavity (working cavity) with the fixed jaw on the upper large and lower small. The movable jaw plate makes periodic reciprocating motion against the fixed jaw plate, sometimes separate, sometimes close. When separated, the material enters into the crushing cavity, and the finished product is discharged from the lower part: when close to the two plates, the material between the two plates is crushed by extrusion, bending and splitting.

01.Low noise, less dust.

02. Large crushing ratio, uniform product size.

03. Safe and reliable lubrication system, easy replacement of parts, simple maintenance.

04. Deep crushing cavity and no dead zone, improve the feeding capacity and output.

05. Energy saving: 15%-30% for single machine, more than double for system.

06. The discharge opening has a wide range of adjustment, and the waste particle size is small, which can meet the requirements of different users.