Product Description

XSD 2610 Wheel Type Sand Washing Machine For Sand Making

XSD Sand Washer is commonly known as wheel-bucket type sand washer. It is developed and produced by through adopting domestic and overseas advanced technologies and combining the actual situation of domestic aggregate industry. It is usually used with the sand maker.

Product Features: Simple structure, low failure rate, big capacity and high cleanliness.

Note: 1. The above parameters are based on the loose specific gravity of 1.6t/m3,compressive strength < 150MPa and water content < 20%;

2. The processing capacity is affected by feeding uniformity, particle size, gradation, lithology and linear speed.

1. Large processing capacity and low production cost

The ideal output of a single machine can reach 180 tons/hour, which basically meets the sand washing needs of our customers; the machine has low investment, low power, and low power consumption, effectively saving production costs.

2. Multiple functions, high cleanliness

The equipment has three functions of cleaning, dewatering, and grading. When working, driven by the impeller, sand and gravel grind each other to remove impurities covering the surface of the sand and gravel, and at the same time destroy the water vapor layer covering the sand, and complete the cleaning in a strong water flow Miscellaneous function.

3. Simple structure and low failure rate

The sand washing machine has a simple and reasonable structure, the impeller drive bearing device is isolated from water and water-receiving materials, a novel sealing structure, and a fully enclosed oil bath transmission device, which greatly avoids the phenomenon of bearing damage caused by water, sand and pollutants occur.

4. Long service life, no pollution

Good structural layout and effective sealing design make the machine durable and require no long maintenance; Less water consumption, low noise, in line with the national environmental standards.

When the XSD series sand washing machine is working, the motor drives the impeller to rotate slowly after deceleration through the V-belt, reducer and gear. The sand and gravel enter the washing trough with the feeding trough, tumble under the impeller, and grind each other to remove the covered sand Impurities on the surface destroy .

At the same time, the water vapor layer covering the sand is destroyed to facilitate dehydration. and add water to form a strong water flow, timely take away impurities and foreign objects with small specific gravity, and discharge them from the overflow washing tank to complete the cleaning effect. The clean sand and gravel are taken away by the blades, and the final gravel is poured into the discharge chute from the rotating impeller to complete the cleaning effect of the gravel.

Tag:

Wheel sand washer Impeller drive Sand washing machine