PEC110Hydraulic 15t H PE Jaw Crusher Ballast Barmac Ore crusher, stone crushing plant

Compared with the traditional jaw crusher, the C series jaw crusher pays more attention to the details in the design and manufacturing. It adopts high-strength materials and has the advantages of higher structural strength, high equipment reliability, large crushing ratio, high output and low comprehensive processing cost.

1. Strong structure
Welding type is generally used for small and medium specifications, and assembly type is generally used for large specifications. It is more convenient to transport and install, especially suitable for underground mines, high-altitude mines and other narrow and difficult places.

2. cavity design, large feed size
Compared with the traditional PE Series jaw crusher, it has the advantages of large feed size, high output, uniform particle size and low jaw wear. The heavy movable jaw assembly is durable.

3. Movable jaw guard plate design, integral bearing seat
It ensures the complete fit with the frame, makes the bearing run more smoothly, and avoids the unnecessary radial load caused by the combined bearing seat in the fastening process.

4. Convenient and quick adjustment of ore outlet

C series jaw crusher adopts mechanical or hydraulic way to adjust the discharge port, and its double wedge adjustment mode is simpler, safer and faster than the gasket adjustment mode, which saves the downtime.

5. Integrated motor installation, shock absorption installation design

The installation space of the jaw crusher is saved, the service life of the triangle belt is longer, the rubber damping device is fixed, and the impact on the foundation is reduced.

The motor drives the belt and pulley, and the movable jaw swings up and down through the eccentric shaft. When the movable jaw pushes the movable jaw plate to move towards the fixed jaw plate, the material is crushed or split. When the movable jaw and movable jaw plate retreat under the action of eccentric shaft and elastic shell, the materials that have been crushed or split before are discharged from the lower discharge port of jaw plate. With the continuous rotation of the motor, the broken jaw is used as periodic crushing and discharging materials to realize mass production and crushing. It is suitable for granite, marble, basalt, limestone, quartz, pebble, iron ore, copper ore, etc.