Technical Parameters
Model: DT800
Max convey length: 6/4
Power: 6-15/5.5kw
Belt length power: 15-30/7.5-15kw
Convey speed:1.25-2m/s
Convey capacity: 310-490t/h
Technical parameters of DT Serial
Belt width (mm) | Convey length (m) | Power (KW) | Belt Length Power (KW) | Convey speed (m/s) | Convey capacity (T/H) |
400 | ≤12/1.5 | 12~20/2.2~4 | 20~25/3.5~7.5 | 1.25~2.0 | 50~100 |
500 | ≤12/3 | 12~20/4~4.5 | 20~30/5.5~7.5 | 1.25~2.0 | 108~174 |
650 | ≤12/5 | 12~20/5.5 | 20~30/7.5~11 | 1.25~2.0 | 198~318 |
800 | ≤6/4 | 6~15/5.5 | 15~30/7.5~15 | 1.25~2.0 | 310~490 |
1000 | ≤10/5.5 | 10~20/7.5~11 | 20~40/11~12 | 1.25~2.0 | 507~811 |
1200 | ≤10/7.5 | 10~20/11 | 20~40/15~30 | 1.25~2.0 | 742~1188 |
1400 | ≤10/7.5 | 7.5~45 | 11~90 | 1.25~2.0 | 785~1560 |
1600 | <10/11 | 11~132 | 15~280 | 1.25~2.0 | 1000~1800 |
1800 | <10/11 | 11~132 | 15~280 | 1.25~2.0 | 1000~2200 |
The classification of DTII series belt conveyor
Categorized by transmission
1,Mechanical transmission series
It adopts cycloid pin-wheel reducer (with outdoor motor) and chain drive structure.
2,II Mechanical transmission series
It is composed of side-hanging reducer and belt drive structure.
3,Electric roller transmission series
It adopts electric roller direct transmission.
Categorized by installation:
1,fixed series
2,Mobile series
It is equipped with tire running mechanism and inclination adjusting device, it can be adjusted freely according to load and unload requirements.
Categorized by structure:
Belt conveyor has three structural forms: channel steel, frame and trussed construction.
When the user is ordering the belt conveyor, it is necessary to indicate with or without repairing walkway.
Features
1. Large conveying capacity
2. Standardize manufacturing;
3. Low operation cost;
4. Easy to be maintained;
5. Saving operation time, and save labor etc;