Drilled Brake Disc 420*40mm For Audi A6 Akebono 10 Pots Brake Caliper

The replacement of brake disc generally has no fixed cycle, which is determined according to the service condition of each vehicle. But there are usually early warnings. For example, when the braking force is weakened or the brake makes abnormal noise. We need to check whether the brake disc groove is too deep.

If there is a deep groove on the edge of the brake disc, it needs to be replaced immediately and grinding is not allowed. Never "Polish" the brake disc that should have been replaced because it is cheap and easy. Artificially prolong the service life of the brake disc, which will lead to thinning and strength reduction of the brake disc, permanent imbalance of braking force and serious potential safety hazards.

The disassembly steps of the brake disc are as follows:

1. Disassemble the tire and brake wheel cylinder;

2. Remove the rear wheel assembly. When removing the rear axle bearing cover, use special tools to avoid damaging the seal of the bearing cover when prying it with slotted screws;

3. Remove the baffle of the rear brake disc and clean the dust in the bearing sleeve after removal;

4. Install a new brake disc baffle, tighten the rear wheel bearing and install the bearing cover;

5. Take out the wheel cylinder bracket;

6. Install the brake cylinder after installing the brake pad, and fasten the screws between the cylinder and the bracket;

7. Install the hub. Brake disc is an important part of the braking system. A good brake disc has the advantages of stable braking, no noise and no shaking.

We Jekit factory can offer different disc size: 285x24/295x24/300x24/300x28/330x24/330x28/330x32/350x34/355x28/355x32/360x28/362x32/360x36/370x36/370x34/380x28/380x32/380x34/380x36/390x36/400x28/400x36/405x34/410x36/420x40mm. You can choose disc design and center cap color

You can install them on any vehicle with disc brakes, but the price tag and vehicle modifications will vary widely, the vehicle's wheels and suspension may need to be modified, and none of it will be cheap. They make after market kits for many applications