Customized Black JkGT6 Calipers And Brake Pads For Audi S4 Front
Feature:
Disc size/mm: 355*32, 362*32, 380*34, 405*34
Fit front or rear wheel Size: 18in, 19in, 20in, over 20 in
Function: 50% Improve Brake Performance
Caliper:
Material: One-piece Forged Body
Craft: Aerial 6082 Aluminum Alloy
Piston: 6 big pistons, Made of Aluminum Alloy
Finish Treatment: High-temperature Baking Coating
Brake pad:
Material: Ceramic graphite
Heat-resistant: 0-500 ℃
Friction Coefficient: 0.49
Rotor (disc+center bell):
Craft: By Forging
Plane Bounce: <0.03mm
Product introduction
Product Name | 6-pots caliper |
Piston Size | φ38,φ34,φ30 |
Outline Size | 330x165x98 |
Brake Power | |
Max Working Pressure | 13.7MPa |
Asseblem Location | R/L |
Assembly Plate Bore Distance | 200mm |
Brake disc Dia. | 405mm 380mm 365mm 350mm 355mm |
Disc thickness | 34mm 32mm |
Structure | monoblock |
Reference No. | GT6 |
Application | Audi, , BMW, , Benz, , Ferrari, 360/430, Chevrolet, Camaro , Benz, AMG/CLS/E/SL, Porsche, 996/997/Turbo/GT3/Cayenne, , Land Rover, |
Color | yellow red black nature |
New brake pad run-in instructions
Note: After the replacement of brake brake pad, if the brake feels soft, Be sure to use the brakes a few times to clear the gap between the brake pads and the disc.Need to run 800-1200 km to achieve better braking effect..Try to run in where the road is good and there are fewer cars,and repeat at least 10 braking cycles.(As shown above)
RFQ