Feature:
Low power supply module
Wide voltage output
Support boost and buck
Long handle potentiometer adjustment
Support enabled/disabled output
Parameter memory function
Support calibration

Module
Input Voltage:DC 3.5V - 12V
Output Voltage:DC 1.0V - 24.0V
Output Power: 3W(Max)
Maximum output power within 2W when output DC 1.0V~2V
Maximum output power within 3W when output DC 2V~24V
Conversion efficiency: 94%
Working current: 30mA
Voltage accuracy: +/-0.5%
Current accuracy: +/-1%
Working Temperature range: -20℃~85℃
Working Humidity range: 0%-95%RH
Size :70*26*14mm

Button Function:
Short press any button to turn ON / OFF voltage output.Turn ON means enabled output and display output voltage at the first line and display ‘On’ then display output current at the second line.Turn OFF means disabled and display 00.0 at the first line and display ‘OFF’ at the second line.
Long press any button more than 3 second to adjust output voltage.The first line will flashing.Short press button ‘UP’ to increase output voltage and short press button ‘DOWN’ to decrease output voltage. Each time press the button, the voltage changes by 0.1V.Module support long press to quickly adjust the output voltage.
Automatically save the set parameters after 3 seconds.

Calibrate Voltage / Current:
Calibrate Voltage:Keep press anyone button before power ON and then power ON and release button after 5 second.Automatically enter calibration mode after 5 second.The voltage display will flashing ‘8.8.8’.Short press button ‘UP’ and ‘DOWN’ to adjust and calibration voltage.Enter current calibration mode if keep press anyone button for 2 second.Automatically save parameters and return to the normal display interface if keep press button for 5 second.
Calibrate Current:Enter current calibration mode if keep press anyone button for 2 second after Calibrate Voltage.The current display will flashing.Short press button ‘UP’ and ‘DOWN’ to adjust and calibration current.Automatically save parameters and return to the normal display interface if keep press button for 5 second.

Using Tips:
Input voltage from USB male socket
Adjust output voltage by buttons to meet require voltage
Remove input voltage
Connect load at output terminal
Re-connect power ON and enjoy using