For SITRAK HOWO MAN MC11 truck spare parts 200V06404-0083 Thermostat housing

Introduction of Thermostat Housing 200V06404-0083
Function and Use
►Control the coolant circulation path: The thermostat housing provides an installation location for the thermostat. The thermostat can control the coolant circulation path according to the temperature of the engine coolant. When the engine is just started and the coolant temperature is low, the thermostat will prevent the coolant from entering the radiator, but let the coolant circulate inside the engine, so that the engine can quickly heat up to the optimal operating temperature. For example, after starting the car in cold weather, the thermostat in the thermostat housing is in a closed state, and the coolant only circulates in the engine cylinder block and cylinder head, which is like putting a layer of "warm clothes" on the engine, which helps the engine to warm up quickly.
►Ensure the stability of the system pressure: It is also connected to the pipeline of the entire cooling system and can withstand a certain coolant pressure. During the operation of the cooling system, the coolant circulates under the action of the water pump, which will generate a certain pressure. The thermostat housing must ensure that the coolant circulates at a suitable pressure to prevent damage to the cooling system caused by excessive or low pressure.
Material characteristics
Generally speaking, this thermostat shell will be made of metal, such as aluminum alloy. Aluminum alloy has good thermal conductivity and can quickly transfer heat, which helps the thermostat better sense the temperature of the coolant. In addition, aluminum alloy has high strength and can withstand the pressure and vibration in the cooling system. At the same time, it also has good corrosion resistance, because the coolant in the cooling system may contain some chemicals, and aluminum alloy can effectively resist the corrosion of these substances and extend the service life of the thermostat shell.

Maintenance and replacement precautions for thermostat housing 200V06404-0083

Regular inspection: During the daily maintenance of the vehicle, the thermostat housing should be checked for signs of coolant leakage. Because if there are cracks or poor sealing in the thermostat housing, the coolant will leak, causing the engine cooling system to malfunction. You can judge whether there is a leak by observing whether there are traces of coolant around the thermostat housing.
Correct replacement: When the thermostat housing needs to be replaced, be sure to use a product that fully matches the original vehicle model, that is, the thermostat housing numbered 200V06404 - 0083. During the replacement process, the relevant parts must be correctly disassembled and installed in accordance with the requirements of the maintenance manual, and attention must be paid to the installation of the gasket to ensure a good seal and prevent coolant leakage.