Galvanized Steel Pipe Clamps Assembly Parts Of Air Ventilation System

Product profile

The material used to manufacture our ventilation pipe clamps without rubber is galvanized steel

DX 51 D+Z80, DX 51 D+Z275. It comes in sizes from 80mm to 1250mm. The width is 20 mm for Dia

80 – 400 mm and 25 mm above Dia 400 mm and the thickness is 1.8 mm under Dia 400 mm and

2.5mm above Dia 400 mm. Our ventilation pipe clamps with rubber also have a quick locking

system on one side from 80 to 400mm. The locking screw is M6x20mm from 80-400mm, and

M10x25mm from 450-1250mm. Last but not least, the Hex nut is M8/M10 for 80-400mm, but also

available for 450-1250mm upon request. The Maximum suspended weight for 800kg is from 80 to

400mm, and for 1000kg from 450 to 1250mm (if there is a hex nut – upon request).

Pipe clamps are two-piece circular pipe clamps fastened together with a pair of steel bolts.

They are used for suspending the spiral duct in the ventilation system.

Similar Items

Company information

FAQ

Q: What is the payment method?
A: We accept TT (Bank Transfer), L/C.
1. For total amount under US$3000, 100% in advance.
2. For total amount above US$3000, 30% in advance, the rest against the copy document.

Q: What is your MOQ?
A: MOQ depends on our client's needs, besides,we welcome trial order before mass-production.

Q: What is the production cycle?
A: It varies a lot depending on product dimension,technical requirements and quantity. We always

try to meet customers' requirement by adjusting our workshop schedule. Usually our normal lead

time is 25-30 days for 1 full container; it is also up to the actual production situation and products

structure.

Q: If you make poor quality goods,will you refund our fund?
A: We make products according to drawings or samples strictly until them reach your 100%

satisfaction.And actually we won't take a chance to do poor quality products.We are proud of

keeping the spirit of good quality.

Q: Could you offer competitive tooling cost?
A: We have own mold work-shop in our factory, for competitive tooling cost and on-time

samples.