Pipe Clamps Rubber For Suspending Spiral Duct In Ventilation System

Product profile

The material used to manufacture our ventilation pipe clamps with rubber is galvanized steel

DX 51 D+Z80, DX 51 D+Z275, with PVC rubber. It comes in sizes from 80mm to 1250mm. The

width is 20 mm for Dia 80 – 400 mm and 25 mm above Dia 400 mm and the thickness is 1.8 mm

under Dia 400 mm and 2.5mm above Dia 400 mm. Our ventilation pipe clamps with rubber also

have a quick locking system on one side from 80 to 400mm. The locking screw is M6x20mm from

80-400mm, and M10x25mm from 450-1250mm. Last but not least, the Hex nut is M8/M10 for

80-400mm, but also available for 450-1250mm upon request. The Maximum suspended weight

for 800kg is from 80 to 400mm, and for 1000kg from 450 to 1250mm (if there is a hex nut – upon

request).

Pipe clamps are two-piece circular pipe clamps fastened together with a pair of steel bolts.

They are used for suspending the spiral duct in the ventilation system.

Similar Items

Company information

We established in 1997, we are one of the largest manufacturers of metal stamping and plastic molding

injection parts in China, we are close to the ocean ports of Ningbo and Shanghai. JH's specialty is made

to order (MTO) parts based on customer drawings or samples, more than 95% of our products are

exported the whole Europe countries, we have in house tool making which allows us to offer low cost

and fast tooling. meanwhile, we could supply the second operation with our customers like riveting,

tapping, electrolating, welding, assembly, powder coating..., we have robtic welder, powder coating and

assembly line in house.

FAQ

Q: What is the payment method?
A: We accept TT (Bank Transfer), L/C.
1. For total amount under US$3000, 100% in advance.
2. For total amount above US$3000, 30% in advance, the rest against the copy document.

Q: What is your MOQ?
A: MOQ depends on our client's needs, besides,we welcome trial order before mass-production.

Q: What is the production cycle?
A: It varies a lot depending on product dimension,technical requirements and quantity. We always

try to meet customers' requirement by adjusting our workshop schedule. Usually our normal lead

time is 25-30 days for 1 full container; it is also up to the actual production situation and products

structure.

Q: If you make poor quality goods,will you refund our fund?
A: We make products according to drawings or samples strictly until them reach your 100%

satisfaction.And actually we won't take a chance to do poor quality products.We are proud of

keeping the spirit of good quality.

Q: Could you offer competitive tooling cost?
A: We have own mold work-shop in our factory, for competitive tooling cost and on-time

samples.