Factory Quality Plastic Test Tube Lab Supplies Disposable Centrifuge Tube 0.5ml,1.5ml,2.0ml,10ml,15ml,50ml

The centrifuge tube is a tubular sample container that may be equipped with a sealed lid or gland. It uses centrifuge technology to generate a strong centrifugal force when the object is rotated at high speed so that suspended particles in the rotating body settle or float up so that certain particles are concentrated or separated from other particles. Depending on the different materials, a distinction can be made between plastic and glass. Plastic centrifuge tubes are most commonly used, which can be divided into PP, PC, PS, etc. According to the needs, manufacturers choose different plastic materials for production. According to the size, they are divided into 1.5 mL, 2 mL, 5 mL, 10 mL, 15 mL, 50 mL, 250 ml, 500 ml, etc. The most commonly used centrifuge tubes are 10mL and 50mL. If your centrifuge is equipped with 30mL or other specifications of centrifuge tubes, consider importing them.

In addition, centrifuge tubes also have round bottoms and pointed bottoms, as well as screw caps and plug caps. Centrifuge tubes with screw caps have finer scales, and those with caps have only one overall capacity mark. In addition, there are centrifuge tubes with round and pointed bottoms, as well as screw caps and stopper caps. Centrifuge tubes with screw caps have finer scales, and those with lids have only one total capacity mark.

Centrifuge tubes made of plastic have the advantage that they are transparent or translucent, have low hardness, and the gradient can be removed by piercing. The disadvantage is that it is easy to deform, has poor corrosion resistance to organic solvents, and has a short service life. The plastic centrifuge tube can be equipped with a tube lid, which serves to prevent the sample from leaking. Especially for radioactive or highly corrosive samples, it is very important to prevent the sample from leaking; the tube lid also has the function of preventing the sample from leaking. Volatilize and support the centrifuge tube to prevent deformation of the centrifuge tube.

When choosing this point, you should also pay attention to check whether the tube cover is tight and whether it can be tightly closed during the test, so as to achieve no leakage when it is inverted. Ji'an Biotech makes experiments easier.

Specification

Centrifuge tube.pdf

Detail picture