Description:The fibers ,250μm,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistantfilling compound.A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member.The tubes(and fillers) are stranded around the strength member into a compact and circular cable core.Then the cable core is covered witha thin Polyethylene (PE) inner sheath,which is filled with jelly to protect it from water ingress.A layer of water-blocking material
is applied around the cable core to prevent it from water ingress all the same.After a corrugated steel tape armor is applied,thecable is completed with a PE outer sheath.Application:Duct/Aerial/Direct buried.
Charateristics:Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
Crush resistance and flexibility
The following measures are taken to ensure the cable
watertight:
Single Fiber Reinforced Plastic as the central strength member
Loose tube filling compound
100% cable core filling
PSP enhancing moisture-proof
Water-blocking material
Standard:Complies with Standard YD/T 901-2009 as well as IEC 60794-1.