Black and Green HDPE Smooth Geomembrane with Chemical Stability and Aging Resistance
Product Introduction
The black and green double-color HDPE geomembrane is a type of impervious material made from high-density polyethylene (HDPE) or low-density polyethylene (LLDPE) as the main raw materials. By adding two different color masterbatches, it is manufactured through a double-layer co-extrusion blow molding process. The resulting geomembrane typically has a black and green appearance on both sides, hence the name black and green double-color HDPE geomembrane.
Chemical stability: The black and green dual-color HDPE geomembrane has excellent chemical stability, capable of resisting corrosion from various strong acid and alkali chemical media, making it suitable for environments such as sewage treatment and chemical reaction pools.
Aging Resistance: This geomembrane has excellent resistance to aging, ultraviolet radiation, and decomposition, allowing for long-term use in open environments. The material's lifespan can reach 50-70 years.
Root Plant Resistance: It has excellent puncture resistance, capable of withstanding most plant root intrusions.
High Mechanical Strength: The black and green dual-color HDPE geomembrane has excellent mechanical strength, with a breaking tensile strength of 28 MPa and a high elongation at break of up to 700%.
Cost-effectiveness: Although new technologies have been adopted to enhance the impermeability, the production process is more scientific and efficient, resulting in a product cost lower than traditional waterproof materials. Generally, construction projects can save up to 50% of costs.
Easy Construction: This geomembrane is highly flexible, allowing for a variety of specifications and laying forms to be chosen according to different engineering needs. With hot-melt welding technology, the seam strength is high and construction is rapid.
Environmentally friendly and non-toxic: The materials used are all non-toxic and environmentally friendly. The anti-seepage principle is based on ordinary physical changes and does not produce harmful substances. It is suitable for use in environmental protection, aquaculture, and drinking water pools.
Product Specification
* Thickness(mm): 0.30mm~3.00mm
* Width:1m~9m
* Roll length: 30m~100m (customized request accept)
PS: Customized request accept for all above.
Geomembrane Series
Smooth HDPE Geomembrane For Landfill (GH-2S & GB/T 17643-2011)
Specification | 0.75mm | 1.00mm | 1.25mm | 1.50mm | 2.00mm | 2.50mm | 3.00mm | Remark | |
Item | |||||||||
Thickness (mm) | 0.75mm | 1.00mm | 1.25mm | 1.50mm | 2.00mm | 2.50mm | 3.00mm | ||
Density (g/c㎡,≥) | 0.939 | ||||||||
Tensile Properties | |||||||||
Yield Strength (N/mm,LD/TD) | 11 | 15 | 18 | 22 | 29 | 37 | 44 | ||
Breaking Strength (N/mm,LD/TD) | 20 | 27 | 33 | 40 | 53 | 67 | 80 | ||
Yeild Elongation Rate (%) | 12 | ||||||||
Breaking Elongation Rate (%) | 700 | ||||||||
Rectangular Tear Strength (N) | 93 | 125 | 156 | 187 | 249 | 311 | 374 | ||
Puncture Strength (N) | 240 | 320 | 400 | 480 | 640 | 800 | 960 | ||
Environmental Stress Crack Resistance (h) (A single point of incision constant tensile method) |
300 | ||||||||
Carbon Black | |||||||||
Carbon Black Content(Rang) (%) | 2.0~3.0 | ||||||||
Carbon Black Dispersion | Nine of 10 observation area should be grade 1 or grade 2, not more than 1 of grade3 | ||||||||
Oxidative Induction Time (OIT) | |||||||||
Standard OIT (min) | 100 | ||||||||
High Pressure OIT (min) | 400 | ||||||||
85℃ Oven Ageing (Minimum Average) | |||||||||
90 days after baking, the standard OIT retention(%) | 55 | ||||||||
90 days after baking, the hight pressure OIT retention(%) | 80 | ||||||||
The Anti-UV Strength | |||||||||
Ultraviolet irradiation after 1600 hours, the standard OIT retention(%) | 50 | ||||||||
Ultraviolet irradiation after 1600 hours, the high pressure OIT retention(%) | 50 | ||||||||
-70℃ The Low Temperature Embrittlement Performance mpact | Pass | ||||||||
Water Vapor Penetration Coefficient g.cm (cm2.s.Pa) | ≤1.0X10-13 | ||||||||
Dimensional Stability | ±2 |
Product Specification and Technical Index (GH-1 & GB/T 17643-2011)
Specification Item |
0.30 | 0.50 | 0.75 | 1.00 | 1.25 | 1.50 | 2.00 | 2.50 | 3.00 | Remark | |
Thickness (mm) | 0.30 | 0.50 | 0.75 | 1.00 | 1.25 | 1.50 | 2.00 | 2.50 | 3.00 | ||
Density (g/c㎡,≥) | 0.94 | ||||||||||
Tensile Yield Strength (N/mm, ≥,LD/TD) | 4 | 7 | 10 | 13 | 16 | 20 | 26 | 33 | 40 | ||
Tensile Breaking Strength (N/mm, ≥,LD/TD) | 6 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | ||
Yield Elongation Rate (%,≥,LD/TD) | - | - | - | 11 | |||||||
Breaking Elongation Rate (%,≥,LD/TD) | 600 | ||||||||||
Rectangular Tear Load (N,≥,LD/TD) | 34 | 56 | 84 | 115 | 140 | 170 | 225 | 280 | 340 | ||
Puncture Strength (N,≥) | 72 | 120 | 180 | 240 | 300 | 360 | 480 | 600 | 720 | ||
Carbon Black Content (%) | 2.0~3.0 | ||||||||||
Carbon Black Dispersion | Less than 1date of Grade 3 out of 10 data, grade 4,grade 5 is not allowed |