Durability And Environmental Protection Sodium Bentonite Geosynthetic Clay Liner
Product Introduction
Sodium bentonite waterproof blanket is made of natural sodium bentonite particles and the corresponding admixtures, which are evenly mixed and fixed between two layers of geotextile by special technology and equipment. This material not only has all the characteristics of geomaterials, such as separation, reinforcement, protection, filtration, etc., but also has excellent impermeability.
Product Properties
1. High expansibility: sodium bentonite can expand at least 24 times when exposed to water, forming a uniform colloidal system with high viscosity and low filtration loss.
2. Excellent waterproof performance: impermeable hydrostatic pressure up to 0.6MPa for one hour without leakage, permeability coefficient as low as 5×10^-11 cm/s.
3. Durability: As a natural inorganic material, aging reaction will not occur, and durability is good.
4. Environmental protection: harmless to the human body, friendly to the environment, is an environmentally friendly material.
5. Simple construction: not limited by the temperature of the construction environment, it can also be constructed below 0℃, and only need to tile, fix and lap during construction.
6. Easy repair: Even if the waterproof layer is accidentally damaged, it can be restored by simple repair.
8. High performance-price ratio: a wide range of uses, with the international geotextile (film) specifications to match, improve construction efficiency.
Product Application
1. Garden landscape: Used for water feature projects such as artificial lakes and roof gardens to prevent water loss and maintain water quality.
2. Traffic engineering: Used in roadbed reinforcement and waterproof engineering of roads and railways to improve the bearing capacity and stability of roadbed.
3. Construction field: In the underground structure of the building and the roof reservoir and other parts of the application to prevent leakage.
4. Mining: Used in the seepage prevention project of tailings ponds to prevent metal ions from penetrating into the surrounding environment, to avoid environmental pollution and harm to human health.
Product Specification
* Unit Weight: ≥4000g/㎡ (customized request accept)
* Width: 4m~6m
* Roll Length:
PS: Customized request accept for all above.
Product Specification and Technical Index (JG/T 193-2006)
ITEM | GCL-NP (Needle Puched Process GCL) |
GCL-OF (Needle Puched and Cocoon Process GCL) |
GCL-AH (Viscose Process GCL) |
|
Unit Weight (g/㎡) | ≥4000 Not less than the specified value |
≥4000 Not less than the specified value |
≥4000 Not less than the specified value |
|
Bentonite Swell Index (ml/2g) | ≥24 | ≥24 | ≥24 | |
Blue Clay (g/100g) | ≥30 | ≥30 | ≥30 | |
Tensile Strength (N/mm) | ≥600 | ≥700 | ≥600 | |
Elongatio At Max Load (%) | ≥10 | ≥10 | ≥8 | |
Peel Strength (N/100mm) |
No-woven Geotextile& Woven Geotextile |
≥40 | ≥40 | - |
PE Geomembrane & No-woven Geotextile |
- | ≥30 | - | |
Pesistance Hydraulic Pressure (m/s) | ≤5.0X10ˉ11 | ≤5.0X10ˉ12 | ≤1.0X10ˉ12 | |
Resistance Hydraulic Pressure | 0.4MPa,1h,No Leakage | 0.6MPa,1h,No Leakage | 0.6MPa,1h,No Leakage | |
Fluid Loss (m/L) | ≤18 | ≤18 | ≤18 | |
Durability Of Bentonite (mL/2g) | ≥20 | ≥20 | ≥20 |