Three-Dimensional Composite Drainage Network For Filtration Drainage And Protection
Product Introduction
Three-dimensional composite drainage network is a new type of geosynthetic material with unique three-layer structure and multiple functions. It is mainly made of high density polyethylene (HDPE) and processed by a special extrusion molding process.
Product Property
Filtration: Geotextiles can prevent soil particles from entering the drainage system to ensure smooth drainage channels.
Drainage function: the middle bar structure provides good water conductivity, so that water can be smoothly discharged.
Protection: The geomesh not only plays a drainage role, but also protects the integrity of the drainage system.
Product Application
1. Landfill: Used to collect and discharge leachate while controlling gas emissions.
2. Road construction: Instead of the traditional sand and gravel layer, it is used for drainage of roadbed and inner wall.
3. Pumped storage power station: used for seepage prevention and drainage at the bottom of the reservoir to enhance the support capacity of the foundation.
4. Other applications: including railway subgrade drainage, tunnel culvert drainage, retaining wall drainage and so on.
Product Specification and Technical Index
Drainage network core | Specification | ||||
Unit Weight(g/m2) | 750 | 1000 | 1300 | 1600 | 1800 |
Thickness(OV=20pa, mm) | 5.0 | 6.0 | 7.0 | 7.6 | 8.0 |
Hydraulic Conductivity(m/s) | K×10-4 | K×10-4 | K×10-3 | K×10-3 | K×10-3 |
Elongation Rate(%) | < 50 | < 50 | < 50 | < 50 | < 50 |
Tensile Strength(core network, KN/m) | 8 | 10 | 12 | 13 | 14 |
Geotextiles(g/m2) | 200-200 | 200-200 | 200-200 | 200-200 | 200-200 |
(CJ/T 452—2014)
Project | Index | |
Geotechnical drainage network | Geotechnical composite drainage network | |
Density/(g/cm³) | ≥0.939 | — |
Carbon Black Content (%) | 2~3 | — |
Longitudinal Tensile Strength/(KN/m) | ≥8.0 | ≥16.0 |
Longitudinal Hydraulic Conductivity (Normal Load 500KPa, Hydraulic Gradient 0.1)/(㎡/s) | ≥3.0×10-3 | ≥3.0×10-4 |
Peel Strength/(KN/m) | — | ≥0.17 |
Mass Per Unit Area Of Geotextile/(g/㎡) | — | ≥200 |