MachineU > China Products > Construction & Real Estate > Earthwork Products > Geomembranes
High Strength HDPE Geomembrane 0.939g/cm3 For Tailings Ponds And Landfills
High Strength HDPE Geomembrane 0.939g/cm3 For Tailings Ponds And Landfills
Specifications
Brand Name :
JianYi
Certification :
ISO9001
Place of Origin :
China
Length :
30m-100m
Width :
1m-9m
Material :
HDPE
Usage :
Liners
Chemical Resistance :
Excellent
Color :
Black, Green, Custom
Elongation At Break :
700%
Density :
0.939g/cm3
Application :
Landfill, Mining, Pond Liner, etc.
Thickness :
0.3mm-3.0mm
Puncture Resistance :
240-960N
Type :
Geomembranes
Description

Special High-Strength Geomembrane For Tailings Ponds And Landfills

Product Introduction

Smooth geomembrane is a kind of smooth surface geomembrane, which is mainly made of high polymer materials such as high density polyethylene (HDPE).

Product Properties

1. Excellent chemical corrosion resistance: can resist the erosion of a variety of chemical substances, including acid, alkali, salt and so on.
2. Large temperature range: can be used in a wide temperature range, with good heat resistance and cold resistance.
3. Long service life: under proper use and maintenance conditions, the service life of smooth geomembrane can be very long.
4. High tensile strength: with high tensile strength and elongation, it can withstand certain water pressure and adapt to foundation deformation.
5. Good impermeability: The use of plastic film impermeability, effectively cut off the leakage channel, often used in waterproof and impermeability projects.

Product Application

1. The impermeable layer of the landfill.
2. Waterproof layer of tailings storage yard.
3. Water conservancy projects in the channel seepage prevention, dam seepage prevention.
4. Waterproofing measures in subway engineering.
5. Seepage prevention of artificial lakes, reservoirs and other water bodies.

Product Specification

* Thickness(mm): 0.30mm~3.00mm
* Width:1m~9m
* Roll length: 30m~100m (customized request accept)
PS: Customized request accept for all above.

Geomembrane Series
Smooth HDPE Geomembrane For Landfill (GH-2S & GB/T 17643-2011)

Specification 0.75mm 1.00mm 1.25mm 1.50mm 2.00mm 2.50mm 3.00mm Remark
Item
Thickness (mm) 0.75mm 1.00mm 1.25mm 1.50mm 2.00mm 2.50mm 3.00mm
Density (g/c㎡,≥) 0.939
Tensile Properties
Yield Strength (N/mm,LD/TD) 11 15 18 22 29 37 44
Breaking Strength (N/mm,LD/TD) 20 27 33 40 53 67 80
Yeild Elongation Rate (%) 12
Breaking Elongation Rate (%) 700
Rectangular Tear Strength (N) 93 125 156 187 249 311 374
Puncture Strength (N) 240 320 400 480 640 800 960
Environmental Stress Crack Resistance (h)
(A single point of incision constant tensile method)		 300
Carbon Black
Carbon Black Content(Rang) (%) 2.0~3.0
Carbon Black Dispersion Nine of 10 observation area should be grade 1 or grade 2, not more than 1 of grade3
Oxidative Induction Time (OIT)
Standard OIT (min) 100
High Pressure OIT (min) 400
85℃ Oven Ageing (Minimum Average)
90 days after baking, the standard OIT retention(%) 55
90 days after baking, the hight pressure OIT retention(%) 80
The Anti-UV Strength
Ultraviolet irradiation after 1600 hours, the standard OIT retention(%) 50
Ultraviolet irradiation after 1600 hours, the high pressure OIT retention(%) 50
-70℃ The Low Temperature Embrittlement Performance mpact Pass
Water Vapor Penetration Coefficient g.cm (cm2.s.Pa) ≤1.0X10-13
Dimensional Stability ±2

Product Specification and Technical Index (GH-1 & GB/T 17643-2011)

Specification
Item		 0.30 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 Remark
Thickness (mm) 0.30 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00
Density (g/c㎡,≥) 0.94
Tensile Yield Strength (N/mm, ≥,LD/TD) 4 7 10 13 16 20 26 33 40
Tensile Breaking Strength (N/mm, ≥,LD/TD) 6 10 15 20 25 30 40 50 60
Yield Elongation Rate (%,≥,LD/TD) - - - 11
Breaking Elongation Rate (%,≥,LD/TD) 600
Rectangular Tear Load (N,≥,LD/TD) 34 56 84 115 140 170 225 280 340
Puncture Strength (N,≥) 72 120 180 240 300 360 480 600 720
Carbon Black Content (%) 2.0~3.0
Carbon Black Dispersion Less than 1date of Grade 3 out of 10 data, grade 4,grade 5 is not allowed

Send your message to this supplier
Send Now

High Strength HDPE Geomembrane 0.939g/cm3 For Tailings Ponds And Landfills

Ask Latest Price
Product Detail
Brand Name :
JianYi
Certification :
ISO9001
Place of Origin :
China
Length :
30m-100m
Width :
1m-9m
Material :
HDPE
Contact Supplier
High Strength HDPE Geomembrane 0.939g/cm3 For Tailings Ponds And Landfills

Changsha Jian-Yi New Material Co., Ltd.

Verified Supplier
1 Years
ningxia, changsha
Since 2008
Business Type :
Manufacturer, Exporter, Trading Company, Seller
Main Products :
HDPE Smooth Geomembrane, HDPE Textured Geomembrane, Compound Geomembrane
Total Annual :
30000000-50000000
Employee Number :
100~150
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products HDPE Smooth Geomembrane
MachineU China Products Construction & Real Estate Earthwork Products Geomembranes
Contact Supplier
Submit Requirement