Innovative Drainage Geotextile Filter Fabric for Soil Stabilization and Reinforcement
Product Application
1. Drainage for various types of retaining walls on the back of the vertical and horizontal.
2. Drainage for highway, railway roadbed and shoulder , soft ground.
3. Drainage for tunnel and underpass.
4. Drainage for electricity ash dam and water dam.
5. Drainage for the central isolation belt of the highway, protect the vegetation.
6. Drainage for the outdoor playground.
7. Drainage for transverse horizontal drilling.
8. Drainage and slope protection for the easy landslide ground.
9. Drainage for the roof garden and flower bed.
10. Maintaining the groundwater of hillside.
11. Drainage of the underground for soil preparation projects.
12. Drainage for the swale and reconstruction of the saline-alkali soil.
Product Property
1. Drainage the penetration water.
2. Lower the saturation line.
3. Reinforcement of the soft soil layer.
4. Enhance the soil and prevent the landslide.
Specification List
Specifacation | Wire Diameter (mm) | Wire Spacing (circle/m) | Outside Diameter Deviation (mm) | Precise Length (m) | Protective Layer Thickness(mm) | (mm) | D | ||
FH30 | 1.5 | 45 | ±2 | 300 | 0.1-0.38 | 300-1500 | |||
FH50 | 1.6 | 47 | ±2 | 180 | 0.30 | 0.1-0.38 | 300-1500 | ||
FH80 | 2.0 | 37 | ±2 | 80 | 0.34 | 0.1-0.38 | 300-1500 | ||
FH100 | 2.6 | 32 | ±3 | 60 | 0.36 | 0.1-0.38 | 300-1500 | ||
FH150 | 3.5 | 24 | ±3.5 | 50 | 0.38 | 0.1-0.38 | 300-1500 | ||
FH200 | 4.5 | 17 | ±4 | 35 | 0.42 | 0.1-0.38 | 300-1500 | ||
FH250 | 5.0 | 19 | ±6 | 0.60 | |||||
FH300 | 5.5 | 19 | ±8 | 0.60 | |||||
Flat Rate Resistant of The Soft Penetrated Pipe | |||||||||
Flat Rate | Unit | Specification | |||||||
FH30 | FH50 | FH80 | FH100 | FH150 | FH200 | FH250 | FH300 | ||
1% | KN | ≥0.08 | ≥400 | ≥720 | ≥1600 | ≥3120 | ≥4000 | ≥4800 | ≥5600 |
2% | KN | ≥0.16 | ≥720 | ≥1600 | ≥3120 | ≥4000 | ≥4800 | ≥5600 | ≥6400 |
3% | KN | ≥0.35 | ≥1480 | ≥3120 | ≥4800 | ≥6400 | ≥6800 | ≥7200 | ≥7600 |
4% | KN | ≥0.60 | ≥2640 | ≥4800 | ≥6000 | ≥7200 | ≥8400 | ≥8800 | ≥9600 |
5% | KN | ≥1.00 | ≥4400 | ≥6000 | ≥7200 | ≥8000 | ≥9200 | ≥10400 | ≥12000 |
Properties Testing(JC937-2004) | |||||||||
Item | Specifacation | ||||||||
Soft Penetrated Pipe | Φ30 | Φ50 | Φ80 | Φ100 | Φ150 | Φ200 | |||
Pipe Roughness | 0.014 | 0.014 | 0.014 | 0.014 | 0.014 | 0.014 | |||
Tensile Strength (KN/5cm, LD) | ≥1.0 | ≥1.0 | ≥1.0 | ≥1.0 | ≥1.0 | ≥1.0 | |||
Elongation Rate(%, LD) | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | |||
Tensile Strength (KN/5cm,TD) | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | |||
Elongation Rate(%, TD) | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | |||
Ball Bursting Strength(KN) | ≥1.1 | ≥1.1 | ≥1.1 | ≥1.1 | ≥1.1 | ≥1.1 | |||
Flow(cm3/S*10-3) | 0.180 | 0.440 | 1.672 | 3.032 | 8.839 | 19.252 | |||
Permeability Coefficient(cm/S) | ≥0.1 | ≥0.1 | ≥0.1 | ≥0.1 | ≥0.1 | ≥0.1 | |||
Sieve Size(O95,mm) | 0.06-0.20 |