MachineU > China Products > Sports & Entertainment > Fitness & Body Building > Cardio Training > Stair Steppers
3phase stepper motor driver JB364MA DC24-50V 5.8A 300 Microsteps Matching 3phase stepper motor size42mm 57mm and 86mm
3phase stepper motor driver JB364MA DC24-50V 5.8A 300 Microsteps Matching 3phase stepper motor size42mm 57mm and 86mm
Specifications
Place of Origin :
Guangdong, China
Brand Name :
Jingbo
Model Number :
JB364MA
Certification :
CE
Phase :
3
Condition :
New
Warranty :
1 year
Delivery Time :
in stock
Payment Terms :
T/T, Paypal, Western Union
Supply Ability :
500pcs per week
MOQ :
1pc
Description

3phase stepper motor driver JB364MA DC24-50V 5.8A 300 Microsteps Matching 3phase stepper motor size 42mm 57mm and 86mm

Features

High performance, low price

16 channels constant angle and constant torque microstep, max revolution is up to 60,000 pulse/R

An unique control circuit is adopted

Upmost response frequency amounts to 200Kpps

Once the pulse stops over 100ms, the phase current will be automatically reduced to half of pre-set current

Bipolar constant current chopper control

Opto-isolated signal Input/Output

Driving current is continuously adjustable from 0.5A/phase to 5.8A/phase

Single power input, voltage range: DC24-50V

It can match 3 phase hybrid stepper motors whose current is under 5.8A, flange size ranges from 42mm to 86mm.

Wiring example

3phase stepper motor driver JB364MA DC24-50V 5.8A 300 Microsteps Matching 3phase stepper motor size42mm 57mm and 86mm

Running current setting

3phase stepper motor driver JB364MA DC24-50V 5.8A 300 Microsteps Matching 3phase stepper motor size42mm 57mm and 86mm

Microstep setting

Microstep

400

500

600

800

1000

1200

2000

3000

4000

5000

6000

10000

12000

20000

30000

60000

D0

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

D1

ON

ON

OFF

OFF

ON

ON

OFF

OFF

ON

ON

OFF

OFF

ON

ON

OFF

OFF

D2

ON

ON

ON

ON

OFF

OFF

OFF

OFF

ON

ON

ON

ON

OFF

OFF

OFF

OFF

D3

ON

ON

ON

ON

ON

ON

ON

ON

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

D4

ON, Double pulse: PU is clockwise pulse signal, DR is counterclockwise pulse signal

OFF, single pulse: PU is step pulse signal, DR is direction signal

D5

Self detect switch (OFF: accept external signal, ON: send out 7.5KHz pulse by the driver，the microstep should be set as 2000-10000pulse/R)

Terminal function

Mark

Function

Notes

O.H

Alarm indicator

The red indicator lights when overcurrent or undervoltage or overheat occurs.

TM

Power indicator

The green indicator lights when signal TM is effective.

Im

Current setting adjuster

Adjust motor’s phase current. Turning it clockwise will increase the current output, counterclockwise will decrease

PU+

Step pulse signal+

It can connect +5V or +24V, but an extra resistor is needed if it connect +24V

PU-

D4=OFF, PU is pulse signal

Effects on falling edge, the motor goes one step as the pulse input change from “high” to “low”. Input resistance is 220Ω. Requirement: low voltage:0-0.5V, high voltage:4-5V, pulse width >2.5μs

D4=ON, PU is clockwise pulse signal

DR+

Direction control signal+

It can connect +5V or +24V, but an extra resistor is needed if it connect +24V

DR-

D4=OFF, DR is direction control signal

Change motor’s direction of rotation. Input resistance is 220Ω. Requirement: low voltage:0-0.5V, high voltage:4-5V, pulse width >2.5μs

D4=ON, DR is counterclockwise pulse signal

SM+

Microstep choosing signal+

It can connect +5V or +24V, but an extra resistor is needed if it connect +24V

SM-

Microstep choosing signal-

Work as the microsteps set by D0-D3 when it is at high voltage, work as half step (600pulse/R) when it is at low voltage

MF+

Motor Free signal+

It can connect +5V or +24V, but an extra resistor is needed if it connect +24V

MF-

Motor Free signal-

Once effects, it will cut off the motor current, the driver stops working and sets the motor free

TM+

Opto-isolated positive of origin position output signal

Motor coil on origin location for effective, opto-isolated output(high voltage)

TM-

Opto-isolated negative of origin position output signal

TM+ connects to a current-limiting resistor of output signal, TM- connects to ground. The maximum current is 50mA, the highest voltage is 50V

+V

Power+

DC24-50V

-V

Power-

U

Connect to the motor

V

W

! Caution

1. Do not reverse the power input, input voltage should not exceed DC50V.

2. Input control signal is 5V, current-limiting resistance should be connected when it is over 5V.

3. Alarm indicator O.H lights and the driver stops working when the driver temperature is over 70℃. It will restart to work automatically until the temperature falls to 50℃. The heat sink is needed when overheat occurs

4. Alarm indicator O.H lights if it is short circuit, please check motor leads and eliminate other short faults, and then repower up to restore

5. Alarm indicator O.H lights if it is undervoltage(lower than DC24V).

Product tags

5a stepper motor driver

,

tb6600 stepper motor driver

,

cw5045 stepper motor driver
Send your message to this supplier
Send Now

3phase stepper motor driver JB364MA DC24-50V 5.8A 300 Microsteps Matching 3phase stepper motor size42mm 57mm and 86mm

Ask Latest Price
Product Detail
Place of Origin :
Guangdong, China
Brand Name :
Jingbo
Model Number :
JB364MA
Certification :
CE
Phase :
3
Condition :
New
Contact Supplier
3phase stepper motor driver JB364MA DC24-50V 5.8A 300 Microsteps Matching 3phase stepper motor size42mm 57mm and 86mm

Shenzhen Jingbo Mechanical & Electrical CO.,Ltd

Active Member
9 Years
guangdong, shenzhen
Since 2009
Business Type :
Manufacturer, Exporter, Seller
Main Products :
AC Servo motor, Closed loop stepper motor, Geared motor
Total Annual :
$1,000,000-$5,000,000
Employee Number :
100~200
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Driver for 3phase hybrid stepper motor
MachineU China Products Sports & Entertainment Fitness & Body Building Cardio Training Stair Steppers
Contact Supplier
Submit Requirement