PoE 60W Gigabit Injector POE Adapter
55V1.1A
POE (Power Over Ethernet) refers to the existing Ethernet cabling infrastructure Cat.5 do not make any alteration of the circumstances, for a number of IP-based terminals (such as IP telephones, wireless LAN access point AP , network cameras, etc.) to transmit data signals at the same time, but also for the provision of DC power supply such equipment technology. POE technology to ensure the safety of the existing structured cabling at the same time to ensure the normal operation of the existing network, minimizing costs.
POE is also known as the power supply system based on local area network (POL, Power over LAN) or Active Ethernet (Active Ethernet), sometimes referred to as Power over Ethernet, which is using the existing transmission standard Ethernet cable At the same time, the transmission of data and electrical power of the latest standards, and maintained with the existing Ethernet system and user compatibility. IEEE 802.3af Power over Ethernet standard is based on the new standard for POE system, which based on the IEEE 802.3 an increase of direct power supply cable through the relevant standards, is an extension of the existing Ethernet standards, is the first of a international standards for power distribution.
Every power supply has passed strict test before delivery,the whole test need about 8 hours:
Transmission Rate |
10/100/1000Mbps |
Efficiency : |
85%(MIN)at Rated Voltage |
Pin Assignment and Polarity |
1/2(+),3/6(–) |
User Port Power: 30W |
AC Input Voltage: 100 to 240 Vac |
AC Frequency: 50 to 60 Hz |
|
Ripple and Noise : |
<120Mv at full road with 20MHz bandwidth |
Turn On Delay Time: |
<3S (AC:110V and full load) |
Reliability |
MTBF: 100,000 hrs. @25℃ |
Regulatory Compliance |
IEEE 802.3af/at (PoE), RoHS Compliant, CE, FCC |
Surge Protection |
AC port: 6kV |
RJ45 port: 4kV |
|
Connectors |
Shielded RJ-45, EIA 568A and 568B |
Indicators |
System Indicator: AC Power |
User Indicator: Channel Power |
|
Pass Through Data Rates |
Pass Through Data Rates |
Safety protection : |
over voltage and current protection for poe injector |
Leakage Current: |
<5mA |
Operating Temperature: |
0°C----+40°C |
Storage Temperature: |
-20°C----+85°C |
Certificate: |
CE FCC ROHS etc |
Safety Standard : |
EN60950-1 UL60950-1 ESD (EN61000 3-3) |
CAS (60950 ITE/TE) FCC Part 15 subpart B Class B |
|
AN/NZS CISPR 22:2006 |
|
Data connector |
RJ45 +Power pins4&5, Power Return pins7&8 |
Futures: |
Compliant with Isolation and Channel |
Characteristics of IEEE802.3af |
|
Data and Power carried over Ethernet Cable |
|
Application: |
IP Telephones, Wireless Network Access Points, |
Blue Tooth Access Point IP Print Servers, Security Camera etc… |