48V 72W 10/100Mbps poe injector power over enthernet
1, Input:
1) Rated Voltage range: 100~240VAC
2) Frequency range: 50/60Hz
3) Inrush current: < 40 A at 230 V
4) Efficiency: >82% (minimum)
5) AC current: 1.1amperes(maximum)
6) Leakage current: < 0,25 mA at 250 V
2, Output:
1) Voltage tolerance: ±3.0%
2) Setup, rising time: 500ms, 50ms at full load
3) Hold up time: >5ms at full load
4) power out pin: midspan 4,5(+) 7,8(-)
5) data speed: 10/100M
6) Rated voltage: 48volts direct current
7) Rated current : 1.5amperes
8) Current range: 0~1.5A
9) Ripple: 480mVp-p
10) Rated power: 72W
3,application
routers, switches, wireless APs, network telephones, industrial network terminals or IP cameras,massager,sos telephone,
4, weight and dimension
1) Certification: CE
2) MTBF: 50Khrs, Mil-HDBK-217F(25°C)
3) Weight: 214gram
4) Warranty Period: 2 years
5) Mounting: Desktop
6) Connection: plug
7) PCB dimension: 121.5*33*58mm
5, Environment
1) Storage temp & humidity: -20~+85°C, 10~95% RH
2) Vibration: EN 61131-2
3) Working temp: 0 ~+40°C
4) Working humidity: 20 ~90% RH non-condensing
6, Safty & EMC
1) Isolation resistance: I/P-O/P: 100M ohms/500VDC
2) EMC: EN55022 Class B
3) Standards: design refer to EN60950
4) Withstand voltage: I/P-O/P: 1.5KVAC, 5mA, 60S
7, Protection
1) Protection Short circuit: YES
2) Over load protection: YES
3) Over power protection: YES