48V 0.4A passive gagibit poe, Power Over Ethernet. non-compliant 802.3 af
INPUT | VOLTAGE RANGE | 110 - 240VAC |
FREQUENCY RANGE | 47~63Hz | |
AC Input Current | 0.7A Max | |
Protection | Internal Primary Current Fuse ,Internal Primary Current Fuse | |
OUTPUT | DC VOLTAGE (Range) | 48V DC |
VOLTAGE RANGE | ±5% | |
OUTPUT CURRENT | 0-0.4A | |
Combined Line and Load Voltage Regulation | Combined Line and Load Voltage Regulation | |
Ripple& NOISE | 1% Vp-p max. | |
Transient Response | 0.5ms for 50% Load Change Typical | |
PROTECTION | Over-Current Protection | 120%~150% rated output power |
Over Voltage Protection | 25.2~32.4V | |
Short Circuit Protection | RTH>70℃ | |
ENVIRONMENTAL | Thermal Performance | Operating Temperature 0° C to 40° C |
STORAGE TEMPERATURE | -30° C to 85° C | |
Altitude | 0-10,000 feet | |
Relative Humidity | Non-Condensing 5% to 95% | |
General Specifications | Dielectric Withstand | Primary-Secondary 3000VAC |
Spacing | 6mm Primary-Secondary | |
Hold-up Time | 18ms min. Typ. at120VAC | |
Approvals and Standards | Designed according to CE,UL,FCC | |
Leakage Current | Less than 250 uA | |
Efficiency | 80% min. | |
DIMENSION | Please contact us for dimension | |
WEIGHT (Range) | 170g (60g - 350g) Please contact us | |
PACKAGING | PE/Poly bag, White box, Giftbox, or Customized | |
CONNECTOR | PLUG | 5.5mm x 2.1mm |
CABLE | UL2464 22AWG/2C 1.2M/1.5M/1.8M or Customized BLACK |
INTRODUCTION:
The high power passive 10/100/1000 Base-T PoE Injector can realize synchronous delivery of device network data and power via one Ethernet cable (Cat.5 or better).The output power of per port is up to 19.2W, which can serve as an outlet for a PoE device (powering via RJ45 port).