Cerium Polishing Wheel X5000 Polishing Wheel For Straight Edge Machine Processing Glass

Glass polishing wheel

The X3000/X5000 polishing wheels are produced by mixing and reacting a highly elastic, high-strength rubber material with high quality cerium oxide, providing high precision and good polishing results.
The chosen X5000 has a finer diamond grain size than the X3000, offering higher precision, better polishing results and a working speed of up to 2840 r / min. The X 5000 can now replace the CE-3 polishing wheels on the market.

The X3000/X5000 polishing wheels offer excellent flexibility and polishing results for a varnished, clear, scratch-free glass surface. Suitable for use on double and straight edge grinder machines. This is the final process for the fine polishing of the bottom edge of glass.

X3000/X5000 polishing wheels are usually used to polish ground glass. Such as architectural glass, furniture glass, electronic glass, electrical glass and interior glass. Such as architectural glass doors and windows, glass tables, glass rods, interior screen glass, glass office partitions, etc.

Cerium Polishing Wheel X5000 Polishing Wheel For Straight Edge Machine Processing Glass

X5000 glass edge polishing wheel is used for glass edge end polishing. Normally used in straight and double edging machine. X5000 glass edge polishing wheel are good at high polishing efficiency, good permeability, and can highlight the original color of the glass.

• Polyurethane wheel combining with plishing power
• Good elasticity and high polishing efficiency
• It could be directly used on the machine, no need to add cerium oxide
• For more brilliant glass edge

How to use the polishing wheel?
In the motor power to determine the size of the polishing wheel, the motor's spindle must match the aperture of the polishing wheel. Put the polishing wheel in the center of the spindle and tighten it with a wrench. Polishing wheel surface line speed uniform to get the best polishing effect, so if you use too big polishing wheel with a smaller motor, when polishing line speed will drop a lot, the polishing effect will be affected.

X-5000 polishing wheel is usually called fine polishing wheel, used for the last polishing head of straight edge or bilateral machine, it is made of high elasticity and high strength rubber and plastic material mixed with polishing very good cerium oxide reaction, so it has excellent elasticity and polishing efficiency, the surface of the glass after fine polishing is flat and bright, no trace, mainly used for the last polishing of straight edge machine bilateral machine and multi-stage straight edge, working at 2840 rpm high speed, polishing effect is very good, especially to solve the long-troubled glass processing plant using CE-3 in 2840 rpm high speed when the bottom or the problem of blowing, this polishing wheel through a number of manufacturers to try to verify the brightness can reach the brightness of imported CE-3, can completely replace the use of imported CE-3.