Jntech 2.2kW 220V AC Three Phase Solar Water Pumping System for Farming in Australia
1. Solar Water Pumping System Introduction
solar pumping system consists of four parts: solar panels, solar pumping inverter, three phase AC pump and water storage device. The solar pumping inverter converts DC power produced by solar panel to AC power which drives AC pump to pump water from borehole, river, lake etc. to the storage device.
The inverter applies high efficiency MPPT algorithm to maximize power harvested from solar panels.It will make the system to maximize efficiency to get the water as much as possible.The solar pumping system fulfills concept of low carbon,energy conservation,environmental protection to improve the living standard in water-deficient area.
2.Solar pump application
3. solar pump system feature
4. Solar panels
Polycrystalline 330w(Vmp=38.1 V, Isc=9.14A) solar panels are used in system configuration
5. Solar pumping inverter
d.c. Max. Input Voltage | 440Vdc |
Recommended MPPT Voltage | 150~400Vdc |
d.c. Max. Input Current | 14.6A |
Max. Motor Output Power | 2.2kW |
Rated Output Voltage | 220 ~240 Vac |
Output Frequency | 0~50/60Hz |
Rated Output Current | 11A |
6. Pump Specifications
We choose pump according tp project head and water requirement.
7. Project on-site
8.Packing & Shipping
By sea | Delivery from Shanghai or Ningbo or Nanjing seaport |
By air | Departure from Shanghai Pudong Airport |
By express | By TNT/DHL/FedEx |