33100 - T0A - H01 Honda Led Headlight HEADLIGHT UNIT R For CR - V / RM

Product introduction

There are two forms of headlights: high beam and low beam. Use low beams on roads with street lights in urban areas and high beams when driving on roads or highways without street lights. When meeting, you should turn off the high beam and replace it with the low beam.

1. When replacing the headlight bulb of the car, you first need to confirm the bulb plug of the car and choose the appropriate product according to the model of your original light bulb.

2. After unplugging the power interface, remove the waterproof cover behind the light bulb. The waterproof cover of the headlights is mostly made of soft glue, and some models are equipped with soft plastic waterproof covers without any difference. You only need to use a little force to see the waterproof cover broken off.

3. Remove the light bulb from the reflector. When taking out the light bulb, you need to pinch the wire spring on both sides with your fingers. After the light bulb is released, pull out the light bulb.

4. Put the new light bulb into the reflector and aim at the fixed position of the light bulb. There are several fixed position on the base of the light bulb. Follow the steps of removing the old light bulb when installing: pinch the wire spring to insert the light bulb into the reflector, aim at the installation position and release the spring to fix the bulb.

5. When covering the waterproof cover, make sure that the edge and fixed position of the waterproof cover fully fit. Finally, connect the headlight power socket, and the operation of replacing the headlights is completed.

Specifications for

Other car

We are auto parts foreign trade, we specialized for retailers, self-employed, auto parts industry to provide auto parts