JT 003A Epoxy Resin 100 pbw

JT 003B Epoxy Hardener 100 pbw

Liquid, Latent, Silica flour filled, hot-curing cast resin system. Specially formulated for convenient in processing with excellent impregnating performance.

Applications

Conventional casting with stage wise curing, or pressure gelation or Processing methods

Automatic pressure gelatin casting (PG or APG process).

Long pot-life, short gel-time under high temperature

Excellent mechanical and electrical properties

Excellent crack resistance

Properties

Hubei Jiangte Insulation Composite Guangzhou Jiangte Insulation Composite Add:No.219,Zhanghua Rd(N),Economic & Development Add:Rm606,DongHong International Plaza, No.

Zone of Qianjiang City, Hubei Province, China. 113, Chebei Rd, Tianhe District, Guangzhou,China.

Tel:+86-728-6201068 Tel:+86-20-82320316

Fax:+86-728-6202066 Fax:+86-20-82315407

JT 8055B contains accelerator. Prolonged storage at high ambient temperatures results in an undesirable increase in its viscosity and impairs the reactivity of the system mix.

It is sensitive to moisture. Partly emptied containers must be resealed immediately.

Remark Prefilled liquid products always show small filler sedimentation.

Before partial use we recommend to stir up carefully the components or to use each

container as complete unity

Storage The components have to be stored under dry conditions at 5 - 25°C in tightly sealed

original containers. Under these conditions, the shelf life will correspond to the expiry

date stated on the label. After this date, the product may be processed only following

re-analysis. Partly emptied containers should be closed tightly immediately after use.

For information on waste disposal and hazardous products of decomposition in the

event of fire, refer to the Material Safety Data Sheets (MSDS) for these particular products.