2. The electronic components of the circuit board and the switches of the control box adopt imported connectors.
3. 24-hour power supply system (DC power can be sufficient), continuous uninterrupted shooting for more than 8-9 hours.
4. The load-bearing capacity of the L-shaped gimbal is less than 25KG (professional gimbal); the minimum rotation speed of the gimbal is 1 minute/12 rpm, and the maximum rotation speed is 1 minute/25 rpm. Professional gearbox uniform speed motor (Swiss coreless motor, low noise, long service life).
5. Imported CH cross rocker potentiometer is adopted, which has high precision, good hand feeling, excellent control effect, horizontal and vertical stepless speed change, delicate and comfortable hand feeling, and convenient video switch control. The pan/tilt can be switched horizontally and vertically; the pan/tilt control handle can change the rotation direction of the pan/tilt at will through the switch, and it supports 360 degree rotation of the camera in the horizontal and vertical directions. The speed and damping can be adjusted, the amplitude is smooth and even, and there is no pause. Canon and Fuji lens switch and video switch.
6. The focusing motor is an imported focusing geared motor with accurate operation.
7. The zoom controller and focus potentiometer are imported with original packaging; the hand feel is excellent, the damping and speed of the zoom and focus can be adjusted, which is convenient and flexible. The cable output adopts imported aviation plugs, plug and unplug fast, stable conductivity, used by top rocker manufacturers at home and abroad, shielded video signal reverse transmission, pan-tilt horizontal and vertical control, etc., the main control line is out of fire and anti-pulling netting. , The plugs are imported plastic aviation plugs with high reliability, good contact, strong conductivity, and can be plugged and unplugged more than 10,000 times without failure. The steel wire adopts 6MM diameter black plastic-coated steel wire, which is easy to fasten and does not need to be cumbersome for locking. The left and right steel wires are the rocker arm´s own device to adjust the tightness. The main steel wire is equipped with turnbuckle screws for fine adjustment. , Which greatly reduces installation time and labor-saving installation of steel wire.
8. With composite, component, signal, rocker arm dedicated monitor. (Optional)
3. 24-hour power supply system (DC power can be sufficient), continuous uninterrupted shooting for more than 8-9 hours.
4. The load-bearing capacity of the L-shaped gimbal is less than 25KG (professional gimbal); the minimum rotation speed of the gimbal is 1 minute/12 rpm, and the maximum rotation speed is 1 minute/25 rpm. Professional gearbox uniform speed motor (Swiss coreless motor, low noise, long service life).
5. Imported CH cross rocker potentiometer is adopted, which has high precision, good hand feeling, excellent control effect, horizontal and vertical stepless speed change, delicate and comfortable hand feeling, and convenient video switch control. The pan/tilt can be switched horizontally and vertically; the pan/tilt control handle can change the rotation direction of the pan/tilt at will through the switch, and it supports 360 degree rotation of the camera in the horizontal and vertical directions. The speed and damping can be adjusted, the amplitude is smooth and even, and there is no pause. Canon and Fuji lens switch and video switch.
6. The focusing motor is an imported focusing geared motor with accurate operation.
7. The zoom controller and focus potentiometer are imported with original packaging; the hand feel is excellent, the damping and speed of the zoom and focus can be adjusted, which is convenient and flexible. The cable output adopts imported aviation plugs, plug and unplug fast, stable conductivity, used by top rocker manufacturers at home and abroad, shielded video signal reverse transmission, pan-tilt horizontal and vertical control, etc., the main control line is out of fire and anti-pulling netting. , The plugs are imported plastic aviation plugs with high reliability, good contact, strong conductivity, and can be plugged and unplugged more than 10,000 times without failure. The steel wire adopts 6MM diameter black plastic-coated steel wire, which is easy to fasten and does not need to be cumbersome for locking. The left and right steel wires are the rocker arm´s own device to adjust the tightness. The main steel wire is equipped with turnbuckle screws for fine adjustment. , Which greatly reduces installation time and labor-saving installation of steel wire.
8. With composite, component, signal, rocker arm dedicated monitor. (Optional)
