22KW / 30HP Intelligent High Efficiency Industrial Air Compressor 3.3m³ / min 1950*910*1905
Desciption

Screw air compressor, an air compressor equipment, adopts high-capacity compression components, and its rotor cylindrical speed is low and the best oil injection is achieved, thus realizing high efficiency and high reliability. The latest design ensures extremely low system temperature and compressed air temperature. Ensure that all components achieve the best cooling effect and the longest service life.
1. Screw air compressor has the advantages of high stability, high efficiency, low vibration and low noise.
2. The matching between the positive and negative rotors and the rotor and the casing is set, so that the backflow leakage of gas is less and there is no excess clearance volume at the same time, so the efficiency is high.
3. The injected lubricating oil has the functions of sealing, cooling, noise reduction and lubrication
4. Compared with piston machine, it has less wearing parts and lower failure rate.
5. The working curve of screw compression is smooth, with less vibration and low noise compared with piston machine.
6. Cooling methods are generally divided into water cooling and air cooling.
7. Heat dissipation system: plate-fin structure and high-quality materials are adopted to ensure the pressure resistance, high heat dissipation efficiency and good corrosion resistance of the cooler.
8. Air filter: Heavy-duty, multistage air inlet filter with dust removal accuracy of 1um(98% filtered out), large working face and long relative service life.
9. Oil/gas separator: The new separator adopts brand-new filter material, which has higher efficiency, and the oil content of air is lower than 2ppm.
10. Intelligent controller: All operation and related data of air compressor operation are displayed on the control panel, which is controlled between your fingers, which is easy, convenient and accurate.

⊙ Schematics

Advantages of Kapa brand

why choose us

Longer service life of the master machine
The rotor uses asymmetrical line running at a low speed with the support of the ball bearings and roller bearings as a result. The damage and the cost are lowered and the service life is extended. Some force is counteracted by the axial force generated by the bevel gear. So the load on the bearings of the master machine is lowered.
Permanent alignment of the electromotor and the master machine
Different from the strap compressor, the SRC series compressor can integrate the electromotor with flange, shaft coupling box-gear box. and the master machine into one in such way the master machine and the electrometer are aligned forever in the transpiration. The SRC series compressors equipped with effective and fully sealed air-cooling electromotor.