10mil Self Healing Paint Protection Film High Quality PPF Gloss Paint Protection Film Gloss PPF – 9H Hardness for Off-Road Protection
Built for adventure vehicles, this gloss paint protection film features a 9H hardness rating – 3x stronger than standard PPF . Its multi-layer construction absorbs rock impacts while retaining mirror-like reflectivity.
Key Features:
KDPPF Technology: 10mil reinforced edges on high-impact zones.
Wash-and-Go Surface: Dirt slides off effortlessly.
Military-Grade Adhesive: Withstands pressure washing and mud.
Color-Stable: No yellowing even under prolonged sun exposure.
Trusted by overlanding enthusiasts and Jeep Wrangler owners for trail-to-town versatility.
Typical Application | Paint, Metal & Surface Protection Films | |
Polymer | Aliphatic Polyurethane (TPU) | |
Total Thichness | 260-370 micron | |
TPU | 130-212 ±10 micron | Lubrizol® |
Glue | 25±5 micron | Ashland® |
Coating | Hard Coating,Good Resistance to Rain Spots | Cashew® |
Protective Film | Super Glossy PET Film 50 micron | |
Release Film | Milky PET Film 70 micron | |
Width | 60 inches (1.52meters) | |
Length | 16.4 yards(15meters) | |
Key Attributes | -Smooth Surfaces | |
-Against Yellowing | ||
-Self Healing Function | ||
-Top Coat Solvent Acid Proof |
Basic Parameter | Test Method | Conclusion |
Temperature Resistance | -122°F--230℉ | √ |
Thermal Repair Performance | Copper Brush Under 5kg Pressure, 176°F Hot Water Completed,Repair More Than 90% In Seconds. | √ |
Chemical Resistance | 10% Sulfuric Acid or Sodium Hydroxide Immersion for 72 Hours | √ |
Stain Resistance | ASTM E313 9B | √ |
Stone Chip Impact Resistance | SAEJ 400 passed | √ |
Puncture Resistance | GB/T 10004 >18N | √ |
Warranty Range | Water Spots, Rain Stains, Yellowing, Filmsurace Distortion | √ |
Rain Spot Resistance | No Visible Patches After Anti-Rain Spot Test | √ |
Coating Adhesion | After Cracks Appear During Stretching, It Will Not Fall Off Due to External Scratches | √ |
Elongation at Break | ASTM D-1044 | √ |
Breaking Strength | ASTM D-1045 | √ |
UV Aging | ASTM D-4329 | √ |
WhatsApp:+86 181 1430 7817
Email: Betty@kdppf.com
Q: Can I wax my PPF-coated car?
A: Avoid abrasive waxes. Use PPF-specific sealants like DiamondCore Gloss Booster 2.
Q: How to repair deep scratches?
A: Heat guns reactivate the self-healing gloss film – minor marks vanish at 158°F (70°C).