Double Bottom Double Cutting Soil Bucket With Soil Or Flat Teeth For Rig Machine On Bored Piles

Buckets are used for drilling in grounds with scarce cohesion or moving soil.
They are manufactured in different versions according to the different systems of keeping of the removed or exhaust material and according to the kind of the ground.

All the components are made with high resistance steel and welded with appropriate processes.

Cases of Double Cutting Double Bottom Soil Bucket

In What Applications Can Double Cutting Double Bottom Soil Bucket Be Used?

Soil Bucket is suitable for drilling in low density sand silt, soft to hard silt clay, Dense to very dense sand and gravel, Coarse gravel, For fine grained soil, High & low plasticity clay for drilling near waterbeds or drilling with bentonies. In shape for any diameter to drill with or without casing.

Kellyway provides high efficiency solution for your drilling require. The rugged hard-faced combo bucket features a patented scissor latch. Located in the vent, the doublefinger latch system stays protected from the drilling spoils, thus allowing the scissor to function without any interference. The double open bottom design allows the operator to open the bottom plate either manually or automatically. Choose from dirt, rock or clean-out drill bottoms.

Factory Product Pictures

What Advantages Do Double Cutting Double Bottom Soil Bucket Provide?

Quite fast and several hundred feet of bore hole advancement per day is possible.

Capable of drilling to full range of depths and diameters necessary for monitoringwell installation.

Direct-mud rotary is limited only by large poorly supported boulders and cavernous formations; reverse-air rotary requires casing in poorly cohesive materials. ·

Direct-mud rotary effective in all hydralic conditions.

·1 Cutting ring with staggered arrangement of bullet teeth

· 2 Easy replacement of drilling teeth with suitable tools.

· 3 Outside helix and bullet teeth to optimize drilling performance

The double open bottom design allows the operator to open the bottom plate either manually or automatically. Choose from dirt, rock or clean-out drill bottoms.

Shipping & Delivery

Packaging Details for Drilling Bucket

1.100% inspection before shipment.
2. Wrapped with plastic film.
3. Fixed with iron support, wheel or pallet when necessary.
4. Packed with plastic cases and wooden cases for drilling bits, clay teeth or other small accessories.
5.As clients' requirements.

Application

Uses a cylindrical bucket with cutting blades or teeth mounted on a hinged bottom to repeatedly cut and lift sediments from the borehole. To drill, the bucket is rotated to allow the bottom of the cutting teeth to fill the bucket. When the bucket is full, it is raised by cable.

Flaps at the bottom of the bucket will close to keep the soils inside the bucket. The bottom of the bucket, which is hinged, is opened to allow the soils to dump into the spoil pile. The bottom of the bucket is closed, the bucket is reinserted into the hole, and the process is repeated as necessary to achieve the proper borehole depth.

Jobsite