1.2Ghz 1.3Ghz 30km FPV Video Transmitter 2W 1.2G 1.3G Drone VTX 8 Channels Analog 1060MHz-1380MHz

1.2G1.3G 2W VTX specification:

1.2G/1.3G-2W VTX selects high-strength aluminum alloy CNC shell for auxiliary heat dissipation, with unique appearance design, stronger impact resistance and better heat dissipation performance.

7-36V wide voltage input, with temperature control protection function to prevent overheating and burning. Supports installation holes of 30.5x30.5mm (M3).

Characteristic:

1. Three adjustable power levels, up to 2000mW, suitable for long-distance flight

2.9 selectable channels

3. Selected high-strength aluminum alloy CNC shell to assist in fan cooling

4. Wide voltage input, supporting 7-36V voltage

7. It has temperature control protection function to prevent high temperature burning

8. Supports installation hole positions of 30.5x30.5mm (M3)

Parameter:

Product Name: 1.2G/1.3G 2W VTX Image Transmission

Size: 40x27.5x13mm

Installation hole position: 30.5x30.5mm (M3)

Frequency band: 1080MHz-1360MHz

Number of channels: 9

Frequency: 1080/1120/1160/1200/1240/1280/1320/1360/1220 (MHz)

Output power: 25mW800mW/2000mW/Bit mode

Frequency stability: ± 100KHz (Typ.)

Frequency accuracy: ± 200KHz (Typ.)

Signal to noise ratio S/N (Fo ± 3MHz):>70dBc

Antenna port impedance: 50 Ohms

Input voltage: DC7-36V (2-8S Battery)

Output voltage: 5V@600mA

Antenna interface: MMCX

Cable interface: sh1.25 6pin

Video format: PAL/NTSC

Working temperature: -10 ℃~+60 ℃

Weight: 22 grams (image only)

Matters needing attention:

1. Install the antenna before use.

2. When the image is overheated, it will activate temperature control protection and automatically reduce power. Please ensure good ventilation and heat dissipation during use.

3. The 5V output is only used for the camera. It is forbidden to connect the power input terminal to the 5V output port, otherwise it will damage the image transmission.