1.2Ghz 2W Video Sender Graphic Transmission Wireless Video Transmitter and Receiver For FPV

I.Description:
1. Frequency point indicator light: red LED (1 frequency point-9 frequency points)
2. Power indicator light: blue LED (25mW)
3. Power indicator light: green LED (2000mW/Pit mode)
4. Frequency point adjustment key
5. Power adjustment key
6. 1.0 6P wiring socket
7. MMCX antenna pedestal
II.Key control mode and LED indicator light definition
1. Key ④ is the frequency point switch key; every time when key ④ is pressed for a short time to switch to the next frequency point, the corresponding red LED ① will flash, 1.2.3.4.5.6.7.8.9 in turn. The operation can be cyclic; see the following diagram for details!
2. Key ⑤ is power adjustment key and and the power will be switched to the next one every time when the key is short pressed once, cyclic between 25mW and 2000mW. The current power is 25mW when the blue LED ② is turned on; the current power is 2000mW when the green LED ③ is turned on; The key is pressed and held for 3 seconds to enter pit mode and the blue LED ② and green LED ③ will be turned on simultaneously. See the following diagram for details!