Specification
AC Voltage Outputs | |
Source Channels | 4 × 300 V ac (L-N) |
AC voltage output power | 35 VA max each@300V |
28 VA max each@3x300V | |
23 VA max each@200V | |
12 VA max each@100V | |
7 VA max each@63.5V | |
6.65 VA max each@57.7V | |
1.1 VA max each@10V | |
Accuracy | <0.015%Rd+0.005%Rg Typ. <0.02%Rd+0.03%Rg Guar. |
Resolution | 0.001V |
DC Offset | <5mV Typ. <60mV Guar. |
Distortion | <0.05% Typ. / <0.1% Guar. |
Rising/Falling response | <100us |
DC Voltage Outputs | |
Source Channels | 4 |
DC voltage output range | 0~300 V (L-N) |
DC voltage output power | 40W Max |
DC voltage accuracy | <0.03%Rd+0.01%Rg Typ. <0.04%Rd+0.06%Rg Guar. |
Rising/Falling response | <100us |
Resolution | 1mV |
AC Current Outputs | |
Source Channels | 6 |
AC current output range | 6 x 0~20A, L-N |
3 x 0~40A, LL-N | |
1 x 0~60A, LLL-N | |
AC current output power (Max) | 180VA Max for 20A L-N 200VA Max for >20A LL-N |
AC current output accuracy | <0.015%Rd+0.01%Rg Typ. <0.02%Rd+0.03%Rg Guar. |
DC Offset | <1mA Typ. <2mA Guar |
Distortion | <0.05% Typ. / <0.1% Guar. |
Rising/Falling response | <100us |
Resolution | 1mA |
DC Current Outputs | |
Source Channels | 3 |
DC current output range | 0~10A, L-N |
DC current output power | 145W |
DC current accuracy | <0.03%Rd+0.01%Rg Typ. <0.04%Rd+0.06%Rg Guar. |
Rising/Falling response | <100us |
Resolution | 1mA |
AC Frequency | |
Range sine signals | DC, 10 ~ 1000Hz, 3000Hz transient |
Output accuracy | ±5ppm |
Resolution | 0.001Hz |
Phase | |
Output range | -360°~360° |
50Hz output accuracy | ±0.1° Typ. / <0.2° Guar. |
Resolution | 0.001° |
Binary Input And Time Accuracy | |
Binary input logarithm | 4 pairs |
Trigger mode | Try/Wet contact |
Input voltage range | 0V~300Vdc |
Timing accuracy | < ±1ms @ 0.001~1s < ±0.1% @ >1s |
Timing resolution | 36us |
Max time limit | infinity |
Binary Output (Relay Contacts) | |
Binary output pairs | 2 pairs(DO-1 and DO-2) |
Type | Potential free relay contacts, software controlled |
Break capacity AC | Vmax:380V(AC)/ Imax:8A/Pmax: 2000VA |
Break capacity DC | Vmax:240V(DC)/ Imax:5A/Pmax: 150W |
Response time | ≤10 ms |
Binary Output (Fast eSSR) | |
Binary output pairs | 2 pairs(DO-3 and DO-4) |
Circuit Breaker Simulate | Can be define as Open or Close status |
Break capacity AC | Vmax:250V(AC)/ Imax:0.2A |
Break capacity DC | Vmax:250V(DC)/ Imax:0.5A |
Response time | <100us |
Contact performance | Open the dry contact output using opto-coupler relay, the on-resistance is ≤ 6Ω, and the shut-off withstand voltage is ≥DC300V |
Time Synchronization (Time accuracy) | |
GPS / BD | Yes, <1us |
IRIG-B | Yes, <1us |
IEEE-1588 | Yes |
Power Charger | |
Rated power supply | 100~240Vac,1-phase |
Rated input frequency | 50 Hz/60 Hz |
Charger output | >65W, compatible with QD3.0 or PD3.0, supporting single-port output of 20V × 3.25A |
Inbuilt Battery | |
Nominal Volume | 10.8V, 2x47.52Wh (5000mAh) |
Operating Temperature |
Charge: 0 to 45°C (Ambient) Discharge: -20 to 60°C (Ambient) |
Charge time (0-80%) | 2h |
Charge time (0-100%) | 4h |
Interface Port | |
RJ45 Ethernet | 1 port, 10/100M |
USB | USB2.0 x 1 |
Wifi | Inbuilt 2.4GHz wifi |
Operation Control | |
Touch Screen & Host Control | Yes, 10.1" LCD |
Basic PC software | Support |
Advance PC software | Support |
Other Information | |
Weight | 3.8kg |
Dimensions (W x D x H) | 288x185x95 (mm) |
Item | Standard | Optional |
IEC61850 SV and GOOSE | None | Optional support |
Low-Level Output | None | Extend Optional support |
Energy Meter Calibration | None | Optional support |
Auxiliary DC Supply | None | Extend Optional support |