NT08EG is a Lte CatM1 Long Term Wifi Location Bluetooth Gateway Equipments GPS Assets Tracker , the device is with IP67 water and dusty proof standard, it can detect different events including removal, motion, collision alarm etc.
Features:
1. Location Tracking
2. Events monitoring
3. Unauthorized motion detect
4. Center No. for data security protection
5. Long term battery
6. Magnets and screws
7. Replaceable batteries
8. 3LEDs for detecting the working status
Specifications:
Physical | Dimension | 154X82X31mm(L*W*H) |
Weight | 500 g | |
Cellular | Communication module | Quectel BG95 M3 Global Version |
Frequency | Working frequency: Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 • Cat NB2: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26*/B28/B66/B71/B85 • EGPRS: 850/900/1800/1900MHz protocol: Embedded TCP/IP stack Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B | |
GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s | |
Processor | STM | |
Motion sensor | DA260 | |
Wifi position | Wifi 4.0 | |
Bluetooth | Bluetooth 5.0 | |
Power | Battery | Disposable Lithium-ion battery and (3.6V,20000mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
Power consumption | Average working current <100mA; Power save current 107uA; | |
GSM antenna | Internal High Gain | |
GPS antenna | Internal High Gain | |
SIM | Microsim | |
Indicator | 2 status LEDs, Green: GPS, Red: Celluar(Inside enclosure) | |
Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
Humidity | 5% ~ 95% (no fog) | |
Ingress Protection Rating | IP67 |
More features: |
• Hardware definition
Enclosure | IP67 waterproof |
Magnets | To stick the device to metal surface |
Power button | Inside the enclosure for hidden installation purpose, to turn on or turn off device |
Light sensor | To detect removal alarm ,remove the sticker on the light sensor, when the device expose to light, it will trigger a removal alarm |
Temperature sensor | To measure the environment temperature |
Motion sensor | To detect the motion or static status of the device, detect motion alarm and collision alarm |
• OTA Commands from Backend
Since the wake up of the device is normally short before enter into sleep mode, it is hardly to receive SMS , to ensure the command sending efficiently, we suggest an OTA commands to be sent from the platform, when the device is online, the backend will automatic send this command, to make sure the commands is properly received.
• Intelligent work modes
The default work mode is regular model: upload interval is one-day one ping, the data packets information includes GPS status, longitude and latitude, cellular signal Strength, satellite numbers, battery level etc, there are multiple track modes available from the device, below is the explanation for work mode priorities:
Track mode>Warehouse >Regular mode =Clock mode=Week mode= Motion and static mode;
The work mode which is equal can be replaced by each other and the last configuration will prevail
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.