● Support GPS, AGPS and LBS, super-fast and accurate positioning
● Built in high sensitive G-sensor accelerometer
● Built in light sensor for removal alarm
● Driving behavior monitor (Speeding, hard declaration, hard acceleration, cornering alarm)
● 9-100 Wide voltage
● Support dual IP and dual protocols
● Support Kingwo,GT800 protocol and JT808 protocol , and protocol switch by SMS or Bluetooth setting
● Support upload interval by time, distance and speed
● Support OTA (Remote firmware upgrade feature)
● Bluetooth features for parameter setting and sensors connecting
Physical | Dimension | 75*40*13mm |
Weight | 45±3g | |
Cellular | GSM module | Fibocom MC615 |
Frequency | Working Frequency: TDD LTE: B38/B39/B40/B41 FDD LTE: B1/B3/B5/B8 | |
GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s | |
Bluetooth | Bluetooth 5.0 | |
Power | Input voltage | 9-100V |
Battery | NI-MH AAA 3.6V/60mA,1.5hours working time based on 2-3 minutes upload | |
Power consumption | Average Current: <30mA (DC 12V) Maximum current: <10mA (DC 12V) | |
Interface | Digital input(2) | Ignition detect |
Digital output(1) | Relay | |
GSM antenna | Internal High Gain | |
GPS antenna | Internal High Gain | |
SIM | Microsim | |
Indicator | 2 status LEDs, Green: GPS, Red: GSM | |
Memory | 1000 packets | |
Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
Humidity | 5% ~ 95% (no fog) | |
Ingress Protection Rating | IP65 |