Magnetic Equipment Gps Tracker 2G GSM GPRS Non-Powered Tracking For Asset
The default setting is the terminal would send one packet each 24 hours, the packet information includes: Position status, longitude and latitude, GSM Signal Strength, GPS numbers, battery voltage etc, the upload interval can be configured
The terminal is with APGS function, when the terminal connects GPRS, AGPS can be used to speed the position speed and improve the position accuracy
The default position mode is by GPS, when GPS enters into the blind zone and cannot position accurately, the terminal will switch to LBS, LBS provides the reference location which is not very accurate
The terminal is with built in WIFI Chip, when it starts, the WIFI Chip will automatically connects to the WIFI hotspot nearby and filter the hotspot info then select the WIFI hotspots with strongest signal, the terminal will pack those hotspots info and saved into the pack that will be uploaded, after the backend receives information from the terminal, it will interpret the WIFI info and acquire the current location info according to the WIFI position server.
The default setting is WIFI priority, once it detects WIFI Hotspot, it will upload WIFI info only , and do not use GPS, if WIFI is not detected, it will use GPS to position
Characteristic | Description |
Built in battery specification | Disposable Lithium-ion battery and (3.6V,2700mAh) and ultra low discharge rate:less than 1%, store one year below 25℃ |
Power consumption | Average working current <100mA; Power save current <15uA; |
Dimension | 64.5mm*41.5mm*25.5mm(MT07/MT07W) 64.5mm*41.5mm*30.5mm (MT07CW/MT07C) |
Weight | 78±5g(MT07/MT07W) 100±5g(MT07CW/MT07C) |
Working Temperature | -20℃~70℃ |
Humidity | 5%~95% |
Frequency | 4 bands:GSM 850/900/1800/1900MHz |
WIFI Frequency range | 2.4 GHz~2.5 GHz (2400M~2483.5M) |
Frequency | GPS L1:1575.42MHz C/A Code BD2 B1 1561.098MHz C/A Code |