NT08EK is a Lte Low Power Consumption Tamper Alert GNSS Locate Equpment Tracking Assets GPS , it has built in Wifi and Bluetooth for heavy machine and equipment tracking , this device has many sensors for event detect as well for example tamper alert , collision alert, vibration alert
Features:
1. Low power consumption
2. Support global bands
3. Multiple sensors for event tracking
4. Motion detect and vibration alarm
5. Strong magnets mount
6. Worldwide coverage
7. Magnets and screws
8. 20000mAh Ion long time replaceable battery
Specifications:
Physical | Dimension | 154X82X31mm(L*W*H) |
Weight | 495±8g | |
Cellular | Communication module | Quectel BG95 M3 |
Frequency | Working frequency: Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 • Cat NB2: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26*/B28/B66/B71/B85 • EGPRS: 850/900/1800/1900MHz protocol: Embedded TCP/IP stack Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B | |
GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s | |
Processor | STM | |
Motion sensor | DA260 | |
Wifi position | Wifi 4.0 | |
Bluetooth | Bluetooth 5.0 | |
Power | Battery | Disposable Lithium-ion battery and (3.6V,20000mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
Power consumption | Average working current <100mA; Power save current 107uA; | |
GSM antenna | Internal High Gain | |
GPS antenna | Internal High Gain | |
SIM | Microsim | |
Indicator | 2 status LEDs, Green: GPS, Red: Celluar(Inside enclosure) | |
Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
Humidity | 5% ~ 95% (no fog) | |
Ingress Protection Rating | IP67 |
More features: |
• Hardware definition
Enclosure | IP67 waterproof |
Magnets | To stick the device to metal surface |
Power button | Inside the enclosure for hidden installation purpose, to turn on or turn off device |
Light sensor | To detect removal alarm ,remove the sticker on the light sensor, when the device expose to light, it will trigger a removal alarm |
Temperature sensor | To measure the environment temperature |
Motion sensor | To detect the motion or static status of the device, detect motion alarm and collision alarm |
• Automatic APN adapt
The device has APN adapt features, however if APN is not in APN adapt list, APN configuration is required.
• Early sleep mode
In order to reduce the waste of power, the device will not continue to work and directly enter the sleep state under those abnormal status:
The device does not recognize the SIM card;
Cellular module resets 6 times continuously;
Device resets 6 times continuously;
Failed to connect to the server (single IP 3 times, dual IP 2 times each);
No response from server after sending upload data three times in a row.
VCC voltage is lower than 2.9V;
After VCC is lower than 2.7V or devices resets 6 times continuously, if the upload interval is less than 60 minutes, the sleep time will be changed to 60 minutes in mandatory ;
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.