NT07EF is a Non powered Disposable Wifi AGPS GPS LBS Long Standby Inventory GPS Tracker with CatM1 Lte-M technology it has built in motion sensor , temperature sensor, light sensor ,GPS, ceullar all in one.
Features:
1. Indoors tracking and outdoors tracking
2. Support global bands
3. Vibration and collision alarm
4. Strong magnets
5. Bolts mount
6. Removal alarm
7. IP67 waterproof
8. AGPS, WIFI,LBS,WIFI
Specifications:
Physical | Dimension | 87mm*51mm*31mm(L*W*H) |
Weight | 192±6g | |
Cellular | Communication module | Quectel BG95 M3 |
Frequency | Working frequency: • Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 | |
GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <26s Hot start: <1s | |
Power | Battery | Disposable Lithium-ion battery and (3.6V, 8100mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
Power consumption | Average working current <100mA; Power save current <7uA; | |
GSM antenna | Internal High Gain | |
GPS antenna | Internal High Gain | |
SIM | Microsim | |
Indicator | 2 status LEDs, Green: GPS, Red:Celluar | |
Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
Humidity | 5% ~ 95% (no fog) | |
Ingress Protection Rating | IP67 |
More features: |
• Magnets and screw mount
NT07E is with built-in with super strong magnet that can firmly stick the device to the metal surface, it is easy to install and conceal, and the device is with waterproof function, which can be installed on any assets that are outdoors
• LBS
The default position mode is by GPS, however when device enters into the blind zone and GPS cannot be fixed, the device will switch to LBS position, LBS provides the reference location which is might not accurate
• OTA commands from backend
Since the wake up of the device is short, it is hardly to receive SMS , to ensure the command sending efficiently, we suggest an OTA commands to be sent from the platform, when the device is online, the backend will automatic send this command, to make sure the commands is properly received.
• Early Sleep Mode
In order to reduce the waste of power, the device will not continue to work and directly enter the sleep state under those abnormal status:
The device does not recognize the SIM card;
Cellular module resets 6 times continuously;
Device resets 6 times continuously;
Failed to connect to the server (single IP 3 times, dual IP 2 times each);
No response from server after sending upload data three times in a row.
VCC voltage is lower than 2.9V;
After VCC is lower than 2.7V or devices resets 6 times continuously, if the upload interval is less than 60 minutes, the sleep time will be changed to 60 minutes in mandatory ;
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.