NT08EF is Anti - Theft Weatherproof Lte CatM1 Ultra Long Battery Life RV GPS Tracker , the strong magnetic and light sensor design is ideally for RV's and Rental Cars, the battery could last 10+ years. .
Features:
1. Quick and invisiable installation
2. Support global bands
3. Wifi and LBS indoors tracking
4. Bluetooth 5.1
5. GPS outdoors tracking
6. Screw and magnets installation
7. Weatherproof enclosure
8. Lithimum Ion mAh battery
Specifications:
Physical | Dimension | 154X82X30mm(L*W*H) |
Weight | 495±7g | |
Cellular | Communication module | Quectel BG95 M3 |
Frequency | Working frequency: Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 • Cat NB2: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26*/B28/B66/B71/B85 • EGPRS: 850/900/1800/1900MHz protocol: Embedded TCP/IP stack Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B | |
GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s | |
Processor | STM | |
Motion sensor | DA260 | |
Wifi position | Wifi 4.0 | |
Bluetooth | Bluetooth 5.0 | |
Power | Battery | Disposable Lithium-ion battery and (3.6V,20000mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
Power consumption | Average working current <100mA; Power save current 10uA; | |
GSM antenna | Internal High Gain | |
GPS antenna | Internal High Gain | |
SIM | Microsim | |
Indicator | 2 status LEDs, Green: GPS, Red: Celluar(Inside enclosure) | |
Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
Humidity | 5% ~ 95% (no fog) | |
Ingress Protection Rating | IP67 |
More features: |
• Intelligent Work Modes
The default work mode is regular model:upload interval is one-day one ping, the data packets information includes GPS status, longitude and latitude, cellular signal Strength, satellite numbers, battery level etc, there are multiple track modes available from the device, below is the explanation for work mode priorities:
Track mode>Warehouse >Regular mode =Clock mode=Week mode= Motion and static mode;
The work mode which is equal can be replaced by each other and the last configuration will prevail
• Temperature detect
The device built-in temperature sensor, it detects the temperature once the device is turned on, then will read it every 16 seconds. The temperature accuracy 95%.
• Wifi failure feature
After powering on the WIFI twice in a row, the serial port did not report any information, and followed the positioning packets it will report a WIFI failure alarm.
• Network and bands lock
P: Network priority
P=1 Lock GSM
P=2 Nbiot Priority,CAT-M Second,GSM final
P=3 CAT-M Priority,GSM Second,NB OFF ,Defaulted
P=4 Lock CAT-M
P=5 Nbiot Priority,GSM Second,CAT-M OFF
P=6 CAT-M Priority,NB Second,GSM OFF
P=7 Nbiot Priority,CAT-M Second,GSM OFF
BandNBiot: Nbiot Bands;ALL-Bands,Multiple bands are separated by half-width commas, for example:B1,B3,B5
BandCAT-M1: CAT-M1 Bands;ALL-Bands,Multiple bands are separated by half-width commas, for example:B1,B3,B5
When set this parameter, please restart the device to make it executed.
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.