LT12 is4G Cat4 Motion Vibration Removal Alarm Detect Container GPS Asset Tracker , it has an air vent type design for perfectly installed to the containers, the device suppports multiple location models and it can last 8 years.
Features:
1. Airvent type for conceal installation
2. Support global bands
3. Wifi ,AGPS and LBS indoors tracking
4. GPS outdoors tracking
5. Screw and magnets installation
6. Weatherproof enclosure
7. 10800 lithimum Ion mAh battery
Specifications:
Physical | Dimension | 205mm*68mm*27mm(L*W*H) |
Weight | 200±5g | |
Cellular | Communication module | Quectel EC25 |
Frequency | Working frequency: 4G networks:TDD LTE/FDD LTE 3G networks:WCDMA 2G networks:GSM/GPRS Network Protocol: Embedded TCP/IP stack Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B | |
GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s | |
Power | Battery | Disposable Lithium-ion battery and (3.6V,8100 or 10800 mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
Power consumption | Average working current <100mA; Power save current <15uA; | |
GSM antenna | Internal High Gain | |
GPS antenna | Internal High Gain | |
SIM | Microsim | |
Indicator | 2 status LEDs, Green: GPS, Red: EMTC | |
Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
Humidity | 5% ~ 95% (no fog) | |
Ingress Protection Rating | IP67 |
4G Frequency supported:
Countries | Frequencies |
China/India | TDD LTE:B38/B39/B40/B41 FDD LTE:B1/B3/B5/B8 |
Europe/Middle East/Africa | TDD LTE:B38/B40/B41 FDD LTE:B1/B3/B5/B7/B8/B20 WCDMA:B1/B5/B8 GSM:B3/B8 |
North America | FDD LTE:B2/B4/B5/B12/B13/B14 WCDMA:B2/B4/B5 |
Australia/Taiwan/Brazil | FDD LTE:B1/B3/B4/B5/B7/B8/B28 WCDMA:B1/B2/B5/B8 GSM:B2/B3/B5/B8 |
More features |
Position
Default upload is 24 hours per packet, the upload packet includes position status, longitude and latitude, GSM Signal Strength, GPS numbers, battery voltage etc, the upload interval can be configured
AGPS
The device is with AGPS function, when the device connects to GPRS; AGPS is used for speeding up the position speed and improve the position accuracy
LBS
The default position mode is by GPS, when GPS enters into the GPS blind zone and no GPS signal, the device will switch to LBS, LBS provides the reference location which is not very accurate as GPS.
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.