NT08E is a 4G Lte-M Lithium Ion Battery Powered 10 Years Heavy Equipment Bluetooth GPS Assets Tracker, the device is with bluetooth for ibeacon features and 20000mah batteries which can work up to 10 years
Features:
1. Wifi MAC ID indoors tracking
2. Bluetooth 5.0 for ibeacon
3. Waterproof for outdoors tracking
4. Intelligent work modes
5. Clock mode, fixed upload, warehouse mode
6. Temperature monitor
7. Jamming detection
8. 10 years work life
Specifications:
Physical | Dimension | 154X82X30mm(L*W*H) |
Weight | 495±5g | |
Cellular | Communication module | Quectel BG95 |
Frequency | Working frequency: Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 • Cat NB2: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26*/B28/B66/B71/B85 • EGPRS: 850/900/1800/1900MHz protocol: Embedded TCP/IP stack Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B | |
GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s | |
Processor | STM32G070CB | |
Motion sensor | DA260 | |
Wifi position | Wifi 4.0 | |
Bluetooth | Bluetooth 5.0 | |
Power | Battery | Disposable Lithium-ion battery and (3.6V,20000mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
Power consumption | Average working current <100mA; Power save current <15uA; | |
GSM antenna | Internal High Gain | |
GPS antenna | Internal High Gain | |
SIM | Microsim | |
Indicator | 2 status LEDs, Green: GPS, Red: Celluar(Inside enclosure) | |
Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
Humidity | 5% ~ 95% (no fog) | |
Ingress Protection Rating | IP67 |
More features: |
• Wifi Locate
The device has built in Wi-Fi Chip, it automatically connects to the WIFI hotspot nearby and filter the hotspot info then select the WIFI hotspots with strongest signal, the device will pack those hotspots info and saved into the packet that will be uploaded, after the backend receives Wi-Fi information, it will interpret the WIFI info and acquire the current location from the Wi-Fi database, The default setting is WIFI priority, once it detects WIFI Hotspot, it will upload WIFI info only , and do not use GPS, if WIFI is not detected, it will use GPS to position.
• ibeacon
The device is equipped with Bluetooth chip, and it broadcasts ibeacon BLE information regularly after power on, and the distance can be checked through the Apple beacon APP;
• Wifi failure feature
After powering on the WIFI twice in a row, the serial port did not report any information, and followed the positioning packets it will report a WIFI failure alarm;
• Collision alarm
When the acceleration change value exceeds A, the device immediately wakes up and reports a collision alarm, please note collision alarm won’t work if the device is in motion and static mode as well as warehouse mode.
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.