1. factory direct selling price

2. All items will be strict tested before shipping. 100% quality assurance !

3. In stock,Timely delivery.Shipping tracking !

Operation Method:

1. Put in 2 AAA batteries

2. Click "SCAN" to boot

3. The default mode in the power-on state is to measure the human body. Click "MODE" once to switch to the measuring object temperature mode.

4. Align the forehead or ear, the distance is about 3-5cm, click "SCAN", hear the buzzer sound, that is, the measurement is completed.

5. Switch between Fahrenheit and Celsius: In the power on state, long press "MODE" for 2 seconds, the screen will appear "F1", click "+" to adjust to Celsius (degree Celsius), click "-" to adjust to Fahrenheit (°F) , click the "MODE" setting again to complete.

6. Set the alarm prompt temperature: long press "MODE" for 2 seconds, the screen displays "F1", click "MODE" again, the screen displays "F2", click "+" once to increase 0.1degree Celsius (0.1 °F) Alarm temperature, click "-" once to lower the 0.1degree Celsius (0.1 °F) alarm temperature, the system initial alarm temperature is 38 degree Celsius (100.4 °F).

7. Temperature error setting: long press "MODE" for 2 seconds, the screen will display "F1", click twice again "MODE", the screen will display "F3", click "+" once to increase 0.1degree Celsius (0.1°F ) To measure the temperature, click "-" once to decrease the temperature by 0.1degree Celsius (0.1 °F).

8. Alarm tone switch setting: long press "MODE" for 2 seconds, the screen displays "F1", click "MODE" three times, the screen displays "F4", click "+" at this time, the alarm sound is ON (ON) , click "-", the alarm sound is off (OFF)

contact

Seller: Seanadore Lin

Wechat SEANLIVE4LG

Email:mask@nnhtextile.com

Phone:008615659710252