MEASTEK MDP5150C 200MHz High Voltage Differential Probe 1500V Range Dual Attenuation Ratio BNC Full Compatible Anti-interference
Key Features:
[High-voltage test pain point terminator]
±1500V over-range design solves the problem of inverter bus voltage measurement
200MHz bandwidth + 1% accuracy, accurately restore PWM waveform details
[Anti-interference golden combination]
80dB CMRR (DC) + 5MΩ high impedance, suppress common mode noise
2pF ultra-low capacitance, avoid high-frequency signal distortion (measured rising edge error <0.3ns)
[One-button intelligent operation]
Automatic zeroing function, complete temperature drift calibration in 5 seconds
Light-touch button design, 100,000 life test more durable
[Multi-scenario adaptation]
Charging pile PFC circuit high-voltage differential measurement
Switching power supply transformer primary side waveform analysis
Variable frequency home appliance motor drive signal debugging
Specifications
Model | MDP5150C |
Bandwidth (-3dB) | 200 MHz |
Rise time (ns) | ≤1.8 |
Accuracy | 1% |
Attenuation ratio | 50X/500X |
Maximum differential measurement voltage (DC+Peak AC) | 50X ±150Vpk |
500X ±1500Vpk | |
Effective value | 50X ±106Vrms |
500X ±1060Vrms | |
Maximum input voltage to ground (Vrms) | 600V CATII 1000V CATI |
Common mode voltage(DC+Peak AC) | ±1500Vpk |
Input Impedance | Single-ended to ground 2.5MΩ |
Two input terminals 5MΩ | |
Input Capacitance | Single-ended to ground <4pF |
Two input ends <2pF | |
CMRR | DC >80dB |
100kHz>60dB | |
1MHz>50dB | |
Noise (Vrms) | 50X <50mV |
500X <300mV | |
Delay time | Host: about 9ns |
BNC cable 1m: about 5ns | |
Overload indicator voltage threshold | 50X >150Vpk |
500X >1500Vpk | |
Overload indicator light (red light) | Yes |
Auto-save function | Yes |
Terminal load requirement | ≥100kΩ |
power supply | USB 5V/1A adapter |
Probe Standard Accessories
Name | Object | Parameters |
Alligator Clips | ![]() | CATIII 1000V CATIV 600V |
Piston probe clamp | ![]() | CATIII 1000V |
Test Hook | ![]() | CATII 1000V |
Input extension cord | ![]() | CATIII 1000V |
BNC output cable | ![]() | BNC male to male output cable (length 1 meter) |
Power output line | ![]() | Length 1 meter |
Power adapter | USB 5V/1A |
WARNING: To avoid the risk of electric shock or fire, do not use the MDP5700A/ MDP5700B/ MDP5700C probes or hook tip accessories on CAT III or CAT IV circuits. To avoid the risk of electric shock or fire, do not use the MDP5700A/ MDP5700B/ MDP5700C test probes or hook tip accessories on circuits above 7000V when using the MDP5070A/ MDP5070B/ MDP5070C probes.
Use only accessories rated for the application. Substituting other accessories may create a risk of electric shock or burns. Keep the probe body and accessories clean to reduce the risk of electric shock from conductive surfaces.
Packing List
Name | Quantity |
High-voltage differential probe | 1 piece |
Alligator Clips | 1 pair |
Piston probe clamp | 1 pair |
Test hook | 1 pair |
Input extension cable | 1 pair |
BNC output cable | 1 piece |
Power output cable | 1 piece |
Power adapter | 1 piece |
Test report | 1 serving |
Warranty card | 1 piece |
Probe box | 1 piece |