MEASTEK MDP5070A 200MHz High Voltage Differential Probe (700V/CE/UL)
Key Features:
1. The user can enter the test mode and adjust the bias voltage. If the probe is out of adjustment after long-term use, the user can enter this mode, adjust the bias, and achieve zeroing;
2. The integrated high-voltage differential probe, electronic touch button, has a longer service life and is more user-friendly;
3. The probe is equipped with a standard BNC output interface and can be used with oscilloscopes from any manufacturer.
4. The high-voltage differential probe has an automatic save function to prevent users from repeating operations after power failure.
5. The probe has good common-mode noise suppression capability, and the input end has a high input impedance and low capacitance. It can accurately and quickly measure differential voltage signals. It can be widely used in the research and development, debugging or maintenance of switching power supplies, inverter electronic ballasts, inverter home appliances and other electrical power devices.
Specifications
Model | MDP5070A |
Bandwidth (-3dB) | 70 MHz |
Rise time (ns) | ≤5 |
Accuracy | 1% |
Attenuation ratio | 10X/100X |
Maximum differential measurement voltage (DC+Peak AC) | 10X ±70Vpk |
100X ±700Vpk | |
Effective value | 10X ±50Vrms |
100X ±500Vrms | |
Maximum input voltage to ground (Vrms) | 450V CATII 600V CATI |
Common mode voltage(DC+Peak AC) | ±700Vpk |
Input Impedance | Single-ended to ground 2.5MΩ |
Two input terminals 5MΩ | |
Input Capacitance | Single-ended to ground <4pF |
Two input ends <2pF | |
CMRR | DC >80dB |
100kHz>60dB | |
1MHz>50dB | |
Noise (Vrms) | 10X <20mV |
100X <120mV | |
Delay time | Host: about 9ns |
BNC cable 1m: about 5ns | |
Overload indicator voltage threshold | 10X >70Vpk |
100X >700Vpk | |
Overload indicator light (red light) | Yes |
Auto-save function | Yes |
Terminal load requirement | ≥100kΩ |
power supply | USB 5V/1A adapter |
Applications
* Floating measurement
* High-voltage isolation measurement
* Switching power supply design
* Power converter design
* Inverter and UPS design
* Welding and electroplating power supply design
* Electronic ballast design
* Motor drive design
* Induction heating and cooker design
* CRT display design
* Low-voltage appliances
* Electronic power and drive experiments
Probe Standard Accessories
Name | Object | Parameters |
Alligator Clips | ![]() | CATIII 1000V CATIV 600V |
Piston probe clamp | ![]() | CATIII 1000V |
Test Hook | ![]() | CATII 1000V |
Input extension cord | ![]() | CATIII 1000V |
BNC output cable | ![]() | BNC male to male output cable (length 1 meter) |
Power output line | ![]() | Length 1 meter |
Power adapter | USB 5V/1A |
Packing List
Name | Quantity |
High-voltage differential probe | 1 piece |
Alligator Clips | 1 pair |
Piston probe clamp | 1 pair |
Test hook | 1 pair |
Input extension cable | 1 pair |
BNC output cable | 1 piece |
Power output cable | 1 piece |
Power adapter | 1 piece |
Test report | 1 serving |
Warranty card | 1 piece |
Probe box | 1 piece |