OBDII Check Engine Light Diagnostic Code Reader Scan Tool for 12V Car

konnwei catalog-official- new arrival.pdf

Description:

KONNWEI KW901 WIFI OBD2 code reader design For All 12V Gasoline And Diesel Vehicles/Hybrid Electric Vehicles with 25K80 chip,it's a 16 Pin plug that plugged into the vehicle OBD port. It comes with an ON/OFF switch to prevent constantly disconnecting your unit from the OBDII port.It also support high speed communication and low power sleep mode.By connecting with phone,it can quickly read car engine emissions data and check drive cycle verification.

Key parameter:

Functions:

• Vehicle Speed
• RPM
• Fuel Consumption*
• Engine Coolant Temp
• Fuel Pressure
• Calculated Engine Load
• Throttle Position
• Intake Manifold Pressure
• Air Intake Temp
• Timing Advance
• Mass Air Flow
• Fuel Level
• Barometric Pressure
• EVAP System Vapor Pressure
• Fuel Trim

Features:

• The adapter uses the fastest and most reliable ARM chips
• KW901 able to detect and interpret these protocols automatically.
• It also provides support for high speed communications and a low power sleep mode.
• It use AT commands to communicate with a host device (For PC, For notebook, For iPhone,For iPod touch, For iPad and so on).
• There are plenty of software packages available, which are fully compatible with KW901.
• Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc.
• You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained.
• The measuring only 2.7 x 1.25x 0.9 inches, and it comes attached with a 6 ft OBDII cable for easy installation.
• It also comes included with a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port.
• It is compatible with 1996 and later vehicles.
• Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mode.

KW901 mini scanner Specifications:

Antenna: Internal

Power Consumption: 0.75 Watts (With Power Switch)

Wifi Standard: 802.11a/b/g

Operating Temperature: -15 to 100 Deg Celsius

Dimensions: 2.75 x 1.25 x 1.2 inches

Connection Type: Wifi

Supply voltage(VDD):12V

Work temperature range: -20 ~ +70degree

Storage temperature range:-40 ~ +125degree

Application :

1. Konnwei KW901 Used For All 12V Gasoline And Diesel Car After 1996 With OBD2 EOBD Protocol

2. Konnwei KW901 Support the following 9 Protocol :

Package :

1* KW901 WIFI Scanner

1* Software CD

1* English User Manual